Question about 1996 Jeep Grand Cherokee

1 Answer

Graphic display monitor

I have a 1996 jeep grand cherokee loredo( quadra-trac) and the graphic display monitor does not light although the vehicle is in 4 wheel drive and all other lights are working. It did light a few times but hasn't recently was going to check for a bulb out but not sure how to get at it. Any info would be appreciated.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

The cover lifts off with a screwdriver bulb is underneth

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

4 wheel drive is not working


so is AWD,? command trac or what trac?

no working means..... using or 4low,?
my wild guess: 1:
Quadra-Trac-II NV 247 Gerodisc system 1999+
got that? what you have for real MATTERS? we cant guess.
the 247 adds LimSlipDiff option to the system got that too>?
symptoms for working are>......
1: lamp dead.
2: lever stuck
3: tires x4 missing torque to earth?
1999 WJ jeep
4 steering binds up.?

say what is there.
and say what not working means , exactly
and say what tires are touching, (pavement , ICE or dirt)
we cant guess, road, either.

Mar 08, 2015 | 1999 Jeep Grand Cherokee

1 Answer

My 4 wheel drive no longer works.


WJ jeeps.
what mode? 4h, 2l lock >?
why not just drive it and get it all loose and happy first.
get the gearlube hot, see if it wakes up, i bet it does.
there is no vacuum hose. that is part time. used long ago.
vacuum ended in 1995 with command trac.
the newer cars the front axle is cut out, inside the transfer case front end. ending vacuum and now electric.

Select track (stay off dry pavement in 4wd)
Quadra-Trac-II NV 247 Gerodisc system 1999+
Quadra-Drive NV247
if quada stay out of low or lock.

read this page,. and discover what you have.
or go under car, see that transfer case, see that silver and red tag
that is the NV number. what is yours>?
we can not guess options. ever.

http://en.wikipedia.org/wiki/Jeep_four-wheel-drive_systems

which one of 4.
http://www.wjjeeps.com/tcases.htm



Mar 08, 2015 | 1999 Jeep Grand Cherokee Limited

1 Answer

Why can't my 2006 jeep go into 4 wheel drive?


are you on dirt? or pavement...????????????????????????
we cant answer until you answer what 4wd option you have.
if that makes no sense, then read the operators guide,
it tells you what's there and how to use it.
read that first, then ask questions,?
and if Part time 4wd?, it';s not to be used on dry pavement only ICE.

eg:

4WD: Select-Trac (or older Select-Drive has a slip coupling too, NP129/229) is AWD in that, "the "4Hi" setting the drive shafts were coupled together using a viscous-type coupler " this anti wind up slipper"
Watch out for exception 1: Select-Trac NP228 based jeeps, it does not have a viscous-type limited-slip coupling. It was used briefly in 1986.
Quada-Trac is full time 4WD (not in lock mode) has a real center differential to shift torque between front and rear. This is the best system , not just a slip clutch as above. Then went BACK to the slipper in 1980. (odd huh?) Up to 1998.
Quadra-Trac-II "4-All Time", "N" or neutral, and "4-Lo". In "4-All Time", torque is applied to the rear wheels under normal driving conditions.
If the rear axle starts rotating at a significantly higher rate than the front axle, hydraulic pressure builds up in the gerotor oil pump and causes the clutch pack, to progressively transfer torque to the front axle, until both axles return to the same speed
Quadra-Trac I was introduced in 2004-10, same as above but is automatic with no driver controls ,like above.
The Quadra-Drive system was introduced in 1999 and is based on the Quadra-Trac II system but adds limited slip differentials (the best full time system ,with great traction to all wheels all the time) 1999 to 04.
Quadra-Drive-II has electronic limited slip differentials or ELSDs 2005 up.

Aug 01, 2014 | 2006 Jeep Grand Cherokee

1 Answer

Why wont my jep go into 4 wheel drive when I pull th lever?


which system?
we cant guess what is In YOUR CAR, ever.
you must SAY. or RTM, in the glove box.
and why are you using 4wd on dry pavement, now>?


4WD: Select-Trac (or older Select-Drive has a slip coupling too, NP129/229) is AWD in that, "the "4Hi" setting the drive shafts were coupled together using a viscous-type coupler " this anti wind up slipper"
Watch out for exception 1: Select-Trac NP228 based jeeps, it does not have a viscous-type limited-slip coupling. It was used briefly in 1986.
Quada-Trac is full time 4WD (not in lock mode) has a real center differential to shift torque between front and rear. This is the best system , not just a slip clutch as above. Then went BACK to the slipper in 1980. (odd huh?) Up to 1998.
Quadra-Trac-II "4-All Time", "N" or neutral, and "4-Lo". In "4-All Time", torque is applied to the rear wheels under normal driving conditions.
If the rear axle starts rotating at a significantly higher rate than the front axle, hydraulic pressure builds up in the gerotor oil pump and causes the clutch pack, to progressively transfer torque to the front axle, until both axles return to the same speed
Quadra-Trac I was introduced in 2004-10, same as above but is automatic with no driver controls ,like above.
The Quadra-Drive system was introduced in 1999 and is based on the Quadra-Trac II system but adds limited slip differentials (the best full time system ,with great traction to all wheels all the time) 1999 to 04.
Quadra-Drive-II has electronic limited slip differentials or ELSDs 2005 up.

Aug 01, 2014 | 2006 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherikee 4 wheel drive not working


You need to be more specific. To start, which 4 wheel drive system your jeep has? (Select Trac, Quadra Trac II or Quadra Drive)
Then: does it never work, or only in 4-Lo?

Dec 22, 2013 | 1999 Jeep Grand Cherokee

2 Answers

What type fluid goes in transfer case of 96 grand cherokee


SELECT TRAC USES MOPAR PLUS 4 OR EQUIVALENT. THE QUADRA TRAC USES MOPAR TRANSFER CASE FLUID OR EQUIVALENT.

Aug 08, 2010 | 1996 Jeep Grand Cherokee

1 Answer

1999 Jeep G C Quadra Trac keeps getting stuck in 4 wheel drive.


universal joint on the driveshaft may do this !
check transmission fluide as well.
good luck

Mar 31, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Turning sharply in parking lot vibration or rubbing feeling in the steering also in reverse on 2001 grande cherokee with quadra track 2


1st let me make sure I understand your Jeeps 4 wheel drive. I believe the quadra trac system is a full time 4 wheel drive, there is no 2 wheel drive setting, only a separate 4 Lo (for very slow speed). If this is correct, the problem is, the quadra trac system you have is supposed to compensate for any variations in wheel speed, whether it's driving in the snow, or cutting the wheels sharply to park on dry pavement. What u describe is typical behavior of a part time 4 wheel drive system. The problem is, your full time 4x4 should be compensating for this, and it's not. So, let me know if the above info about your 4wd is accurate (no part time 4wd setting, no 2wd setting, only full time 4wd and 4Lo setting. If it is, the system is not compensating for changes in the wheel slippage correctly.

Mar 21, 2009 | 2001 Jeep Grand Cherokee

1 Answer

4 wheel drive not working


sounds to me like the transfer case clutches are worn out. also the fluid could be low or dirty. try draining and refilling the transfercase with clean fluid. if it is still not working after driving it around for a few miles then you may need to replace or overhaul your transfercase

Jan 10, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...