Question about 1992 Honda Accord

1 Answer

Have a 1987 honda accord the coil is good i get no fire from it to distributer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Wil be the ignition amplifier

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 honda accord wagon. Replaced ignition coil and distributer yet and still no fire


need to make sure that there is 12 volts coming into coil,then go from there

Nov 13, 2012 | Cars & Trucks

1 Answer

Not getting fire to distributer on my 1987 Ford F150 truck


You mean no spark on the coil wire to distributor cap? Then test the coil or try a known good coil. If the coil is good, have the ignition module tested at a parts store. Post back for more.

Jul 24, 2012 | 1987 Ford F 150

2 Answers

What is the kv output of my ignition wire on a 1987 honda accord


The plug should hold the firing voltage down to about 8kv. If the mixture is lean, it could be up around 12kv or down to 6kv if the mixture is rich. If you pull the wire off the plug, the voltage will start arcing across to something close by and this generally happens at about 25kv.

Sep 26, 2011 | 1987 Honda Accord

1 Answer

Won't run, got fuel, got spark from coil to distributer but will not fire. Tried new plugs, fuel filter and dust. cap. No go.


You may want to change your rotor bug in distrubtor,If this don't work you may have bent or wornout shaft goig down from distrubutor inside motor. But if your getting fire to the coil but not the distrubtor i think the rotor bug will fix it. Good luck to you.

Apr 16, 2011 | 1992 Honda Accord

1 Answer

I need to know the location for the starter on my 1987 honda accord.


It is located just under the distributator on top off the bellhousing. It has two bolts that hold it on. This is on the Passanger side of the car.

Dec 03, 2010 | 1987 Honda Accord

2 Answers

I have no spark in my 1987 honda accord i have replaced the coil and a new distributor also the main relay fuse is good as well as all the other fuses look good it turns over just fine seems to want to...


I would check the crank sensor located on the bell housing. This senses that the engine is turning and allows a spark to be produced. No sensor no spark.

Oct 09, 2010 | 1987 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...