Question about 1998 Chevrolet Cavalier

1 Answer

Brake Problem Hi,i have cavalier ls 98model i am having problem with my brakes when ever i apply brakes its not up to that mark in short the paddle goes inside, my mech told me to replace the brake shoes and do the grinding or give a cut at the turning machine, even after that i m not comfortable,how can i clear my doubt,qnd one more thing whenever i turn to my right there in ther dash board ETS and hand brake light pops up, kindly help me with your suggestion.THANK-YOU

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 175 Answers

Check from low brakes fluid if is low thats mean there is some leak in the brake system if its not check the flow sensor which is in the brake pump fluid tanke it should be up

Posted on Mar 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse light on when brake is applied


Manny, I am confused too. When you apply brake, brake light should light up. There is no connection with reverse lights which have no color. Have you checked the manual? If you can't find solution, you may have to show it to a good mechanic because operating a vehicle this way could give wrong signals to traffic behind.

Dec 23, 2013 | 1993 Lexus Ls 400

1 Answer

Brake lights dont work


Check the fuse if the fuse is good then check the power source when apply brakes everything check out good, then is the brake switch theone that mount on the top of the brake paddle. Good luck

Sep 18, 2012 | 1999 Chevrolet Lumina

3 Answers

Brake paddle slowly goes down when brakes are applied


If your brakes system has no air in it...Your master cylinder or brake booster is bad.

Jul 18, 2011 | 1996 Honda Civic

1 Answer

I have a 1992 Altima that has break lights that won't turn off unless I disconnect the battery. Do you think that this is a ground wire?


No check your brake light switch, could need adjusting, follow brake paddle up under dash, switch will hook up to it.Adjust it in or out, till switch hit brake paddle arm, the button on the switch is push in, brake light will be off, till you apply brakes then it will come on.

Aug 05, 2010 | 1995 Nissan Altima

2 Answers

Head lights burn some time only after you press and release the park brake repeatatly whats worng


Well the headlights do not come on if the parking brake is still on. So maybe in your described case you are having a problem with the switch at the park brake. The switch is probably sticking in the "park brake applied" position. If you look at the switches at the parking brake and can spray some penetrant on them this may free them up.

Dec 06, 2009 | 1992 Chevrolet Cavalier

1 Answer

Brake lights stay on 1991 Lexus LS 400


Simple fix... Just replace the brake light switch. It is located on the brake pedal arm about 6 inches above the pedal, it will have a plug going to it as well.

Jul 04, 2009 | 1991 Lexus LS 400

1 Answer

Noise while applying brakes or turn left / right


Sounds like the break rotors are warped. At this point its best to do a break job, chanses are the calipers are the problem not releasing and creating heat, or break lines are not returning fluid back to resavor witch in turn warp the rotors. Run the whole gamet on the breaks. New rotors, New calipers, New pads, and New rubber break lines to calipers. And you will solve your break problem.

Apr 04, 2009 | 2000 Ford Crown Victoria

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...