Question about 2004 Dodge Ram 1500

1 Answer

Where is the iat sensor on my 2005 dodge ram 2500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 78 Answers

Hi there:

If your truck has a 3.7L or a 4.7L engine it is on the right side of the air box just on the engine end of the flexable rubber boot that extends from the right fender. If it is a SRT it is located in the rubber boot that extends from the front of the truck on the left hand side of the boot just before it connects to the engine.

Hope this helps
Farrout!

Posted on Mar 18, 2009

3 Suggested Answers

  • 114 Answers

SOURCE: iat sensor

Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.

Hope this helps you out

Posted on Jan 23, 2009

  • 7167 Answers

SOURCE: Mass air sensor on a 2000 Dodge Ram 2500

inline of air duct (plenum) after air filter

Posted on Nov 30, 2009

Shorty1_wt
  • 324 Answers

SOURCE: wHERE IS THE iat SENSOR ON A 2008 DODGE RAM 1500,4.7L V8

on the intake manifold passenger side near the front i think

Posted on Jan 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 dodge ram truck 2500 2wd code reader says 4 codes dont know what they mean p1509, p1298, p0118 andp0113


P1509 Dodge - Leak Detection Pump Switch or Mechanical Fault

P1298 Dodge - Air/Fuel Ratio Lean Under Wide Open Throttle Condition
- Plugged air filter
- Plugged fuel filter
- Defective fuel pump
- Ignition system weak-misfires
- Defective coil

P0118 Dodge - Engine Coolant Temperature Sensor Circuit High
- Low engine coolant level
- Faulty Engine Coolant Temperature (ECT) sensor
- Faulty engine coolant thermostat
- Engine Coolant Temperature (ECT) sensor harness is open or shorted
- Engine Coolant Temperature (ECT) sensor electrical circuit poor connection

P0113 Dodge - Intake Air Temperature Sensor 1 Circuit High
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection

Dec 16, 2013 | Cars & Trucks

1 Answer

Can't find it IAT sensor 2005 dodge diesal 3500


Click the link below.It has location of IAT sensor and the instructions to remove and install iat sensor.------ http://technoanswers.blogspot.com/2011/03/where-is-iat-sensor-located-on-dodge.html ----------------------- This should help.Thanks.Helpmech.

Mar 21, 2011 | Dodge Pickup Cars & Trucks

1 Answer

I have a 2004 Dodge Ram 1500 Quad cab the check engine light came on at 91.000 miles engine lite is on code read number P0113. What is the problem and how it can be repaired ?


Relates to problem with I.A.T. sensor/circuit. Normally replacing I.A.T. sensor will fix it.
I.A.T. = Incoming Air Temperature.

Jan 27, 2011 | 2004 Dodge Ram 1500

3 Answers

I cannot find the IAT sensor on my 2001 dodge ram v10


Its hidden on the drivers side. its just below the 3rd bolt back for te upper plenum, count the bolts back and look down on the lower intake.

Aug 30, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

Wher is the IAT?


the iat sensor is located in the fresh air duct connected to the air filter in front of the fuse/relay control panel. to remove the iat sensor, renive the air filter cover and using a pair of wire cutters remove the small steel band holding the sensor in place. then by pulling on sensor it will come out. when replaceing sensor be sure to install new metal ring on new sensor to secure it in place.

Apr 28, 2010 | 2005 Dodge SRT-4

1 Answer

WHERE IS THE iat SENSOR ON A 2008 DODGE RAM 1500,4.7L V8


on the intake manifold passenger side near the front i think

Jan 23, 2010 | 2008 Dodge Ram 1500 2WD

1 Answer

Could you tell me where I can locate the IAT sensor in an 02 dodge ram 1500 with a 4.7 V8


Here is the location ...

80d410a0.gif 1 - LEFT SIDE OF THROTTLE BODY 2 - ELEC. CONNECT. 3 - IAT SENSOR 4 - RELEASE TAB

Jun 11, 2009 | 1998 Dodge Ram 1500 4WD

2 Answers

Iat sensor


Hi there ... The IAT sensor is on the intake manifold, just behind the alternator. For further info on this sensor you can go to www.autozone.com. click on repair info,select your vehicle. then click on vehicle repair guides. In the product search box at the top left type in IAT and then click on the repair guide in the box that appears and it will give you more info.

Hope this helps you out

Jan 23, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,018 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...