Question about 2001 Chevrolet Cavalier

2 Answers

BLINKERS DON'T WORK

I CHANGED THE FUSE BUT THEY STILL DON'T WORK

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You need to replace the actual harness that holds the bulb, I spent over a year trying to figure this out.

Posted on Mar 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 60,792 Answers

Replace the turn signal flasher.

Posted on Feb 24, 2009

1 Suggested Answer

emissionwiz
  • 60792 Answers

SOURCE: my blinkers don't work on my 1979 elcamino,changed blinker switch,they still don't work jumped the flasher nothing,fuses good and bulbs good,and all other lights work just no blinkers

You will need the wiring diagrasm, we do not have them but you can access them here www.alldatadiy.com

Posted on Jun 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I own a 2001 Chevy unpalatable and it work fine and everything but the blinkers don't wanna seem to work properly its like 95% they don't work as for the other 5% the blinkers only wanna work when...


Make sure all outside blinkers are flashing at one speed, if not check the bulbs and all connections, If that doesn't work check flasher

May 09, 2013 | Cars & Trucks

1 Answer

I have a 1990 sx corolla the car won't start the reds on the dash don't even appear but my headlights work and the blinkers the battery is fine and i just changed the altinator what else could


If the warning lights do not come on and the car will not start, I would guess the key switch has failed or a major fuse is blown.
I would check the fuses first, then for power at the key switch.

Sep 16, 2012 | 1990 Toyota Corolla

1 Answer

Both blinkers don't work but flashers do


There should be a flasher unit on the fuse box under the dash for the turn signals and another behind the dimmer switch for the hazards.
Sometimes one of the flashers is behind the fuse box in the glove compartment if equipped.
Don't be surprised if the flasher is not the problem. Most of the time the problem is the multi-function switch on the column.
There are stories online about using WD40 to take care of the switch problem.

Sep 12, 2012 | 1996 Ford Taurus

2 Answers

2005 Ford Focus- Blinkers, Brake lights and hazards don't work -just change the bulbs and they still don't work. Help!


That should be on two different fuses, but everything goes thru the turn signal switch.
The switch might be faulty. A mechanic would check for voltage there.

Jul 11, 2012 | Ford Focus Cars & Trucks

1 Answer

I have a 1990 Ford Taurus and my blinkers don't


blinkers sounds like the flasher unit is not working. It's located under dash. Also check for burnt out bulbs.
Rear defrost, or rear defogger?: Your defogger for the rear window would run off a relay, probably located in the fuse panel of your car. Often, the connections at the rear window get broke or disconnected.
Front defrost: does your heater blower work?

Oct 28, 2011 | 1990 Ford Taurus

1 Answer

I have replaced all my blinker light bulbs and allthe fuses. Put in new flasher fuses and pulled blinker arm and replaced with kit. And the break lights and and blinkers still don't work


on the brake lights, check to be sure the switch located at the top of the brake pedal isn't stuck, you can Jumper the switch to see if that works,

Jul 22, 2011 | Dodge 400 Cars & Trucks

1 Answer

Both turn signals and emergency blinkers stoped working..changed flasher-still dont work ??


see if braek lighs work if so check fuse box for fuse or related fuse to that sys tem if its not that you need it ckeck the turn signal switch it self see its is getting power and you don;t have a bad ground to it then the switch is problely bad

Oct 21, 2010 | 1995 Chevrolet Astro

1 Answer

Blinkers just stopped working changed fuses didnt work


Do the hazards work? Is it all the blinkers? If so try the flasher fuse otherwise make sure the hazard switch isn't half pressed down. Some cars you can hit the hazard switch just a little so hazards won't come on but neither will the blinkers. If it's just 1 blinker change the bulb

Aug 22, 2009 | 1998 Chevrolet Cavalier

1 Answer

Blinker


hi i presume you mean your indicaters won,t work since you changed your headlights firstly are the headlights the same as you took out and the wiring connectors the same and what do you mean the indicators don,t work example none of them they run to slow/quick its just the front ones just let me know and we will see if it can be put right yates210456

Sep 17, 2008 | 1994 Honda Accord

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...