Question about 2000 Chevrolet Blazer

1 Answer

Front end right front side of my 2000 Blazer 4x4 makes a short winding sound when put in reverse and moves about 20 yards or so. After that it makes no noise till next time you back it out of the drive way. Any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 99 Answers

Check the fluid level in the trans. With the engine hot, truck idling in park, make sure the fluid reaches the "HOT" range on the trans dip stick and it is bright red and doesn't smell burnt.

Posted on Mar 01, 2009

  • wraith0127 Mar 01, 2009

    I also forgot to mention to check the fluid in the transfer case and the differentials.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2000 ford expedition 4x4 the front right side makes a clicking noise while driving. Any ideas


Clicking Noise From Left Front Tire Area - F150online Forums

www.f150online.com/.../47713-clicking-noise-left-front-tire-area.html
Aug 11, 2001 - I have a clicking type noise comming from the left front tire. It does not ... I can really hear it when I'm driving beside a sound wall or the side of a building. ... the sound. (Yeah right!) ... Almost forgot: 1999 Ford F150 XLT Supercab 5.4 4X4. ... My 2000 4X4 had a ting ting noise coming from the left front wheel. Intermitent Grinding Noise on 2004 F150 4x4 - Page 5
Jan 15, 2010
Popping noise in front end.
Oct 26, 2009
Clicking noise at low speeds.
Aug 7, 2009
Annoying clicking sound in rear of truck?!?!
Jun 8, 2009
More results from www.f150online.com

Jan 05, 2016 | Ford Cars & Trucks

1 Answer

2000 chevy blazer ls 4x4 poping noise in the frount end rotors are shot the axel is some what shot


ok -- not quite sure what the problem is, yet a viable solution would be to replace it. Try area salvadge yards for your parts to keep the costs down.

Jan 15, 2011 | 2000 Chevrolet Blazer

2 Answers

Popping noise in front drivers side of 1998 chevy Z71 in reverse


Look at where the torsion bars go through the control arm and get someone to move the vehicle back and forth and see if they are moving. This is most likely. Let me know what you find.

Apr 27, 2010 | 1998 Chevrolet K1500

1 Answer

Rear wheels on 2000 super duty f250 skid in reverse only


I hate to say it but it sounds like you have a severe problem in the rear end. Here are a couple of things i would do. First pull off your tires and wheels. Of course you need to put the truck on jack stands and block the wheels for safety! Disconnect your rear drive line so you know nothing from front diff or trans could be affecting it. Next spin the brake rotors by hand and inspect them for severe damage. Go forwards and backwards. Also listen in your rear end for grinding or clunking noises and also excessive play front foward to reverse. And last drain your oil and put your finger up inside the housing as far as you can and feel for large pieces that should not be there. This should give you a good idea if it is in your braking sytem your rear end or wether you need to start looking at front diff. or the trans. If all is good on rear end do the same thing for front diff and inspect it as well. Make sure you pull front driveline off!

Feb 03, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

2000 chevy blazer will not go into reverse, but all other gears work fine.


sounds like reverse let go you need to have trany rebuilt. soory for the bad news, good luck.

Nov 29, 2009 | 2000 Chevrolet Blazer

1 Answer

Wont go into reverse and doesnt go into 3rd unless i let off gas


It sounds like you broke the sun gear shell in the transmission. This is real common on 4L60E. The transmission will have to be disassembled to fix it. If this is what is wrong it will have no reverse and hold 1st till about 30 and then skip 2nd, right to 3rd. Then never shift in to 4th.

Mar 11, 2009 | 1990 Chevrolet K2500

1 Answer

2000 blazer wont move


its the transmission, if it were the 4x4 not disengaging the vehicle would still move but in 4x4 mode.id get it to a shop if at all possible

Feb 01, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...