Question about 1998 Plymouth Grand Voyager

1 Answer

1996 Plymouth Grand Voyager

Wipers only work after depressing wash button. I have replaced the multifunction switch and still have the same problem. If I have wipers on low, push the wash button, they work for two rotations at low, If I have them on high, push the wash button, they work for two rotations at high, then stop. Any ideas............? I have a similar problem..turned the wipers on ...nothing..lost rear/front wipers ,headlights,tailights,cluster,interior lights. Chrysler [Canada] wants $1200, for the part ,plus cost to ''program'' it,plus labour cost! Apparently they do not want you to use a used part,because it may not work..But at $1200 -plus I see there point! But thanks to you I will definitely try a used one...

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

The delay switch on the wiper motor may have went bad, the only way to fix it is to replace the wiper motor. for (i have the same problem),your computer may be shot or you have a faulty wiring harness.

Posted on Feb 24, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1998 plymouth grand voyager windshiield wipers come on and work fine but can't shut off

Turn the key off then engage your e brake one click. Then turn your key on and you will have no lights!--------------------------------------------------------------------------
vas 5054a

Dec 03, 2012 | 1998 Plymouth Voyager

1 Answer

1997 Plymoth Grand Voyager windshield wipers and door locks turn on and off while driving with no warning. Now the cruise control no longer works. Where is the Body Control Module located, and how much...

the turn signal switches go bad on 99% of those cars. the other one percent its the bcm[behind fuse box drivers side. or a wire to it. either one of the door ajar switches[usullay the slider ]is out of ajjustment or one of the door lock cylinder switces is bad.

Jul 02, 2010 | 1996 Plymouth Voyager

1 Answer

No power at relay... fuse is good.... can jump power to relay prongs 87 & 87a to make wipers work... relay prong 86 is dead,no power or ground jump power to that prong with relay in & it trips but...

The current flow is controlled by the multifunction switch on the steering column. If the problem is in the electronic parts, wiring, switch (except the integral motor park switch) and wiper motor a DTC will be stored in the BCM. You will need a DRB scan tool. Check with some auto part stores, some stores will do scans for free.

Nov 06, 2009 | 1996 Plymouth Grand Voyager

1 Answer

1996 Ply. Voyager. Wipers not always intermittant.

it sounds like the control board on the wiper motor has gone bad you'll have to replace the the motor

Oct 15, 2009 | 1996 Plymouth Grand Voyager

2 Answers

Windsield washer not working 1996 Plymouth Grand voyager

If you can hear a clicking noise it want be the fuse change the washer motor

Jun 10, 2009 | 1996 Plymouth Grand Voyager

1 Answer

Plymouth Grand Voyager SE, 1997. 3.0 litre

check to see if you have life at the wiper motor plug.if have a dodgy switch.

Jun 10, 2009 | 1997 Plymouth Grand Voyager

2 Answers

Windshield wipers don't work

check the fuse then the relay then the switch.

Dec 25, 2008 | 1995 Plymouth Voyager

2 Answers

1996 Plymouth Grand Voyager

I had the exact same problem PLUS my power door locks and some guages stopped working. I replaced the Body Control Module (BCM) which is behind the inside fuse box and problem was fixed. I did get the part from a salvage as the unit from Dodge was $1000. Make sure you replace with same part number and disconnect battery before working on it. One downfall of changing BCM is I now have a new odometer reading.

Sep 28, 2008 | 1996 Dodge Caravan

1 Answer

1998 Plymouth Voyager 3.3

no spark

replaced coil
and brain

Jul 13, 2008 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides