Question about 1992 Mitsubishi 3000GT

3 Answers

92 3000gt won't start

I have replaced the bettery and spark plugs and wires. And it still won't start.

Posted by on

  • margo331 Mar 23, 2009

    Thank you I wil try it. I all ready checked the fueses and all of them are good. I will try this as well... I still have the same problem and we just replaced the gas pump and nothing, I will check the oil.. Thanks again, let me know if there is something else that I could check...

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Check all your fuses that sounds like your problem

Posted on Feb 24, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

If its isnt cranking over then check ure ground on starter if it is only things left to check are spark and fuel u can buy new things but if u have wireing issues then it wont help n u dont know if you just invested into things u didnt need but then again doesnt hurt to have new stuff n e ways get a spark tester from auto parts store (cheap like 10 bucks or somthing) n go frm there make sure u have pressure in fuel line if not change fuel filter the check injectors

Posted on Nov 18, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure it has plenty of oil. I couldn't figure out what was wrong with mine about a month ago and i had a buddy come look at it and he said there was oil in it but not enough bc it has a safety that won't let it start if the oil is to low. So try that and see what happens.

Posted on Mar 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced starter on 1989 f150 5.0 now have no spark


Mike, Check for diagnostic codes. Check fuses/relays,wires/plugs for pinched,damage or corrosion. Could be a lot of things like distributor armature, cap, rotor, stator, ICM, coil,spark plugs,wires, make sure ground is good to distributor. Use the attached forum links,instruction, guides to help diagnose ignition spark problems, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
No spark replaced all ignition parts 1990 F150 Ford F150 Forum Community...
Engine Spins but No Start No Spark
Engine Won Start No Spark
Code Reader 80 96 Ford Bronco
Resolved 89 Ford F150 302 Won Start HELP

Jun 24, 2016 | Cars & Trucks

1 Answer

Engine won't start


the spark plug wires can be confusing but a 4 cylinder is not that hard from the front of the engine being where the pulleys & belts are its 1,2,3,4 on the coil or distributor it can be in counter or clockwise rotation 1&3,2&4 or 1&4,2&3 likely its 1&3,2&4 hope you find this helpful

Mar 03, 2013 | Cars & Trucks

1 Answer

My car won start and I already replaced the spark plugs


power pack to spark plug wires is bad are poor conection.allso check make sure car is getting gas if no sound of fuil pump kicking on when ignition is first turned check all fuses if good replace fuil filter.

Jan 19, 2013 | 1992 Buick LeSabre

1 Answer

I have a 94 chrysler concorde. The problem is it won't start, I have replaced the fuel pump and the fuel pump relay fuse. And it still won't start. What should I do now?


check see if you getting spark if not.have vechicle code scan could have faulty ECM .faulty camshaft sensor and crankshaft sensor.make sure engine has been tuned up.replace fuel filter change spark plugs and wires. before engine can run need fuel and spark.either one not working car will not crank.

Jan 12, 2013 | Cars & Trucks

1 Answer

My car won't start,seems like no spark?/,just turns over and over


before u replace the whole dist. have u first checked for fuel delivery on the carb or fuel rail, and then if u have that then check the spark plug wire by removing one while cranking by arcing to metal , if you see spark then dist is good if not then replace, but if dist is good and still no start then check coil pack and or all fuses

Apr 25, 2012 | Cars & Trucks

1 Answer

1990 Cadillac Seville won't start. Is it the electronic control module?


Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This For spark plug problem, click the help links provided below: ---
Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------
How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

-------------
Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

----------
How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

-----------
Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

-----------
How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

---------
How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

---------
Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.
Thanks.

Feb 19, 2012 | 1990 Cadillac SeVille

1 Answer

1999 chevy k2500. changed spark plugs 4 times in 7 months. Runs good for a week then doesn't start. Changed spider, throttle body sensor. Still has no codes and once again won't start.


The next time it won't start ,pull a sparkplug wire and see if you're getting fire.Then we'll known whether its a ignition or fuel problem and go from there.

Jan 11, 2012 | 1999 Chevrolet K2500

1 Answer

It cranks but it won't start. I got a new battery, cam position senor and crank position sensor. took out the ignition control was told that was still good.


Check for spark at the plug wires to spark plugs, no spark on anything, then suspect a fouled job replacing the cam position sensor.

Oct 03, 2011 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

1994 camry won't start after cleaning under the hood check dist. cap replaced spark plugs sounds like its going to start then doesn't.


Sounds like wet or moist spark plug wires. If this also occurs during early morning high dew point humid air, then you may have spark plug wires shorting out.

Replace wires.

Jul 02, 2011 | 1994 Toyota Camry

Not finding what you are looking for?
1992 Mitsubishi 3000GT Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...