An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: stuck rear window
To remove the door panel there will be 2-5 screw bolts in places like the door handle and behind switch and handle panels. Remove them then teh panel will either lift straight up or pop out if it is held with panel plugs then use a flat pry tool to pop them out.
It does sound like the regulator which is cable driven and will by basiclly held on the glass and the door with bolts. You will need to move the old motor to the new part.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it is possible the regulator is fine and it just came unattached from the glass. Grasp the glass and try to move it up and down if it will move up and down tape it up until you get it fixed. If it seems like it is still attached then yes likely you will need to replace the regulator.
1995 Isuzu Rodeo Stereo Wiring
Left Front (+)
Left Front (-)
Right Front (+)
Right Front (-)
4" Side Panels
Left Rear (+)
Left Rear (-)
Right Rear (+)
Right Rear (-)
Hi..I have a 1998 Isuzu Rodeo also...The problem is you need to replace the starter or rebuild it...It's best to just buy a new starter..Trust me on this..I had the same problem and did everything you did and more..From the research I had to go thru it's just best to buy a new one with a warranty..Just some advice if you do this yourself..The down y pipe on the exhust will have to be removed to do so..you must spray the bolts with wd-40 or pb blaster and let it soak over night...If not you will pull your arm out of it's socket trying..Also jacking the car up until the front driver side wheels are way up of the ground, This will give you a little more room to use a breaker bar to pop the nuts loose..I hope this helps you..Good Luck!!