Question about 2006 Chevrolet Malibu

1 Answer

How do i remove rear seat in a 2006 malibu - 2006 Chevrolet Malibu

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

The bottom sections comes out first, and the bottom section is held in place by 1 of 2 ways.

1. bolts, look under the front of the seat if there are 2 bolts remove them if not

2. push the front edge of the seat backwards and lift up at the same time - it should unhook - do this on both sides.

Once the bottom portion is out the back will have bolts on the bottom remove then lift up.

Posted on Feb 23, 2009

  • Anonymous Apr 30, 2015

    Can someone please take pictures of the bolts that allow me to remove the back portion of the seat?

×

2 Suggested Answers

  • 1 Answer

SOURCE: My wife removed the rdiver side rear seat from a

I had the same problem, but a slightly different variation. Apparently, my wife has the strength of several men. She bent the small guide wheel that rolls into position as the rear latch engages. It took me hours of staring at the unbroken seat, and then back at the broken one, before I noticed the difference. Also, it was not easy to bend the guide wheel back into position, until it released. Then I took the seat out, and bent it back into position with a pair of channel locks. Oh, and I had to cut the protective plastic cover off of that rear latch assembly to get a good whack at it. It's difficult to explain, so feel free to email me, and I'll post pictures. samoceanboy@yahoo.com

Posted on Jul 08, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove back seats


According to the service manual for my 2006 VUE, 2 bolts in front and 5 bolts behind the rear seat is all you need to remove to get the whole seat out. Removal of any components of the rear seat always starts with "remove the rear seat assembly".

May 24, 2014 | 2006 Saturn Vue

1 Answer

My 06 malibu rear seat will not go down due to stuck switch


Push on the seat to the rear while pulling the cable release. Sounds like latch is adjusted too tight. If this works make adjustment before putting the seat back up. Open trunk & you should also be able to get to the speakers and the latch for the seat back. May require a screwdriver or something narrow & long to push on the latch arm while another person pushes & pulls the seat back to unlatch.

Chris

ASE Master Certified sense 1979

Feb 02, 2013 | 2006 Chevrolet Chevrolet Malibu

1 Answer

How to fold the rear seats in malibu 2011?


You should notice a looped strap of cloth next to the head rest at the top of the seat. That is the release for the seatback lock. Simultaneously pull up on the strap and pull the head rest forward to fold the seat forward. The seats are split 60/40, so each seat has its own release looped strap.

Jul 17, 2012 | 2011 Chevrolet Malibu

1 Answer

Need to replace fuel level sending unit in an, 06' chevy malibu


The sender is in the fuel tank.Some GM vehicle's tanks are such a pain to remove that they have an access panel above it(trunk or rear seat area?) so the sender can be changed more easily.If not,you'll have to drop the tank to change it.

May 11, 2012 | 2006 Chevrolet Malibu

2 Answers

Drivers seat how do i take it out 2005 malibu drivers seat is sagging on the right rear


pry off any plastic bolt covers where the bolts secure the seat
pull 4 bolts securing seat to vehicles floor pan
Disconnect negative battery teminal,
disconnect any electrical plugs going to the seat
pull out drivers door opening

Aug 19, 2010 | 2005 Chevrolet Malibu

2 Answers

2004 Malibu with broken weld on seat motor


you will have to replace the complete assy. the cheapest way is look for a complete wrecking yard seat, or have yours welded at a local machine shop

Jan 08, 2010 | 2004 Chevrolet Malibu

1 Answer

2006 malibu maxx brakes problem...


Yes air gets into the hole system. You need to bleed all 4 wheels.

Jul 02, 2009 | 2006 Chevrolet Malibu Maxx

1 Answer

Fuel pump removal


Unless there is an access panel in the trunk, you will have to drop the tank.

May 31, 2009 | 2003 Chevrolet Malibu

2 Answers

Malibu air bag module location


The module is under the passenger side seat,under the carpet.You will have to remove the seat to access it easier.Lift up the carpet and it will be mounted to the floor.

Mar 01, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2006 Chevrolet Malibu Logo

1,426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...