Question about 1994 Mazda Protege

2 Answers

Hi I need torque specs for b5 dohc(cylinder head job)

Cam bearing caps and head bolts

Posted by on

  • keepitroostn Apr 04, 2009

    need torque specs for b5 dohc(cylinder head job

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The pdf manual says it is 10 - 13 ft lbs  from my research it is 75 ft lbs
I hope I am right cus I just set my head at that :( before i got the pdf file!
havent started it yet though

Posted on Mar 13, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 42 Answers

Generally for cam and head bolts it is 40-45 lb/ft. go to chilton it varies car to car, engine to engine.

Posted on Mar 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flywheel torque spec's for 1983 Ford F-100


Could it be a F-150 instead?
Ford Engine Bolt Torque Chart Bolt Torque Spec Chart for Ford Engines

These specs are for stock-type bolts with light engine oil applied to the threads and the underside of the bolt head. Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use after-market performance bolts like ARP's, you should follow the recommended torque specifications.

260, 289, 302 Torque Spec.
Fastener Type Torque Spec Main cap bolts 60-70 ft-lbs Outer main cap bolts 35-40 ft-lbs. Connecting rod bolts (40-45 ft-lbs. for 289 HP & Boss 302) Cylinder head bolts 65-72 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs Oil pump bolt 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolts 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351W Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 90-100 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs. Oil pump bolts 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351C, 351M Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs. Connecting rod bolts 40-45 ft-lbs. (45-50 ft-lbs. For Boss 351C) Cylinder head bolts 105 ft-lbs. (125 ft-lbs. For Boss 351C) Rocker arms (non-adjustable) Rocker arms (non-adjustable) 5/16in. intake manifold bolts 21-25 ft-lbs. 3/8in. intake manifold bolts 28-23 ft-lbs Oil pump bolt 25 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 9-12 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-18 ft-lbs. 360, 390, 406, 427, 428FE Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs. Crossbolts for 406-427 40 ft-lbs. Connecting rod bolts 40-45 ft-lbs. (53-58 ft-lbs. For 406 and 427) Cylinder head bolts 80-90 ft-lbs. (100-110 ft-lbs. For 1963-67 427) Rocker arm shaft bolts 40-45 ft-lbs. Intake manifold bolts 32-35 ft-lbs. Oil pump bolt 12-15 ft-lbs. Cam bolts 40-45 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 429-460 Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 140 ft-lbs. Rocker arms (non-adjustable) 18-22 ft-lbs. Intake manifold bolts 25-30 ft-lbs. Oil pump bolt 25 ft-lbs. Cam bolts 40-45 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-18 ft-lbs.

Dec 18, 2015 | Ford Cars & Trucks

1 Answer

Torque spec's for the fly wheel


Ford Engine Bolt Torque Chart Bolt Torque Spec Chart for Ford Engines

These specs are for stock-type bolts with light engine oil applied to the threads and the underside of the bolt head. Moly and other lubes offer reduced friction and increased bolt tension, which will affect the torque figure. If you use after-market performance bolts like ARP's, you should follow the recommended torque specifications.

260, 289, 302 Torque Spec.
Fastener Type Torque Spec Main cap bolts 60-70 ft-lbs Outer main cap bolts 35-40 ft-lbs. Connecting rod bolts (40-45 ft-lbs. for 289 HP & Boss 302) Cylinder head bolts 65-72 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs Oil pump bolt 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolts 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351W Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 90-100 ft-lbs. Rocker arms 17-23 ft-lbs. Intake manifold bolts 23-25 ft-lbs. Oil pump bolts 23-28 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 8-10 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351C, 351M Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs. Connecting rod bolts 40-45 ft-lbs. (45-50 ft-lbs. For Boss 351C) Cylinder head bolts 105 ft-lbs. (125 ft-lbs. For Boss 351C) Rocker arms (non-adjustable) Rocker arms (non-adjustable) 5/16in. intake manifold bolts 21-25 ft-lbs. 3/8in. intake manifold bolts 28-23 ft-lbs Oil pump bolt 25 ft-lbs. Cam bolts 40-45 ft-lbs. Cam thrust plate bolts 9-12 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-18 ft-lbs. 360, 390, 406, 427, 428FE Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs. Crossbolts for 406-427 40 ft-lbs. Connecting rod bolts 40-45 ft-lbs. (53-58 ft-lbs. For 406 and 427) Cylinder head bolts 80-90 ft-lbs. (100-110 ft-lbs. For 1963-67 427) Rocker arm shaft bolts 40-45 ft-lbs. Intake manifold bolts 32-35 ft-lbs. Oil pump bolt 12-15 ft-lbs. Cam bolts 40-45 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 429-460 Torque Spec.
Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head bolts 140 ft-lbs. Rocker arms (non-adjustable) 18-22 ft-lbs. Intake manifold bolts 25-30 ft-lbs. Oil pump bolt 25 ft-lbs. Cam bolts 40-45 ft-lbs. Harmonic damper bolt 70-90 ft-lbs. Flywheel / flex-plate bolts 75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-18 ft-lbs.

Dec 18, 2015 | Cars & Trucks

1 Answer

Camshaft torque isuzu 6ve1


wow, no year stated,
the cam has a front drive, bolt torque and cam bearing cap torque.
The 6VE1W 3.5L DOHC 24V V6 was introduced in 1998 with 215 hp (160 kW) and used until 2004 with the termination of the Isuzu Axiom. Gasoline direct injection was added for 2004 only and boasted output to 230 hp (172 kW). This was a stroked version of the 6VD1.

ill answer for 1998, rodeo 3.5L
alldata.com , try reading all the steps, not just torque . RTV steps
and sequence, of cap torque.

answer for caps
  1. Apply RTV gasket material to the mating surfaces of the cam bracket and head. Do not allow the gasket material to protrude.
  2. Install the caps and bolts. Torque the bolts, in sequence order, to 89 inch lbs. (10 Nm).

Apr 11, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

Torque setting for 1972 Cororna


My manual shows an 8RC for 70 and 71 and an 18RC for the 72-74

18RC valve clearance HOT IN .008 EX .014 cold spec. .007 .013
Cyl head 72-82 Ft Lbs
Rocker caps 12-17 ft lbs
cam bearing clearance .001-.002
cam endplay .0017-.0066
oil tube 11-16 Ft Lbs

Jun 15, 2013 | Cars & Trucks

1 Answer

Engine torque settings


Commonly Asked Torque Specs in foot pounds
The main bolts have a torque of 76 lb.-feet and the cylinder head bolts have 62 lb.-feet of torque. The cylinder head studs have 70 foot-lbs of torque, the cam timing gear have lb.-feet of torque, and the cam bearing bolt has 14 lb.-feet of torque.

Crankshaft Torque Specs
  • The stock rod bolts have 46 lb.-feet of torque and the ARP rod bolts have 50 lb.-feet of torque. The crankshaft pulley has 116 lb.-feet of torque, while the flywheel has 80 lb.-feet of torque.


Other Torque Specs
  • The intake manifold and exhaust manifold have 33 lb.-feet of torque each and the oil pan bolts have 9 lb.-feet of torque. The cam timing gear has 58 lb.-feet of torque and the cam bearing bolt has 14 lb.-feet of torque. One set of timing cover bolts have 9 lb.-feet of torque and another set has 29 lb.-feet of torque

Nov 07, 2012 | 1994 Toyota Corolla

1 Answer

Torque value on 2001 mercury cougar head bolts and over head cam bolts on 2.5 engine


cylinder head bolts

step 1 30 ft lbs.

step 2 additinoal 90 degrees

step 3 loosen all bolts 360 degrees

step 4 30 ft lbs.

step 5 additional 90 degrees

step 6 additional 90 degrees

camshaft bearing cap bolts 89 inch lbs.

Dec 31, 2011 | 2001 Mercury Cougar

1 Answer

I have no book on a hyundai tiburon 1997 and i need the torque specifications on the head bolts and cam bolts.


1.8L
Head bolts:
(M10) 30 Nm (300 kg.cm; 22 lb.ft) + (60°to 65°) + (60°to 65°)
(M12) 35 Nm (350 kg.cm; 26 lb.ft) + (60°to 65°) + (60°to 65°)

Camshaft:
Using two or three steps, tighten the bearing caps to 12-14 Nm (120-140 kg.cm, 9-10 ft. lbs.)

Sep 24, 2010 | Hyundai Tiburon Cars & Trucks

2 Answers

How to torque engine heads,rod bearings and main bearing by foot pound?


cylinder head bolt torque for a DOHC Turbo 3.0L V6

92 ft lbs.

cylinder head bolt torque for a Non-Turbo

76-83 ft lbs.

main bearing caps

mark on head of bolt "9" 59 ft lbs.

mark on head of bolt "10" 70 ft lbs.

connecting rod nut 38 ft lbs.

Sep 07, 2010 | 1992 Mitsubishi 3000GT

1 Answer

How to replace a broken timing belt


Daewoo has interference engines in them, so if the timing belt broke while the engine was running, you will need to replace half of the valves which were bent when the pistons crashed into them when the cams stopped turning and the crank shaft continued to turn. Minimum of $700-1000.00 (usually more). If you do it all yourself and the valve guides are not damaged, still at least $400.00 worth of parts to fix. Pull plastic air dams around bottom of engine on front and right side . Support engine with jack. Drain antifreeze from engine and radiator. remove air filter housing and serpentine belt. remove front engine mount. remove cam belt cover. remove broken cam belt and check cam tensioner bearings and idler bearing as well. They are usually bad. Then remove spark plug cover. Remove valve cover. Remove intake from head. remove coil from head. remove heat shield from exhaust manifold then remove manifold from exhaust and from head. remove water hoses and connecting assemblies from side of head and rear of head. remove Cam shaft bearing caps loosening them all evenly so as not to bend cams. remove cams. remove head bolts. remove head. remove valve hydraulic lifters, compress valve springs and remove valve retainers and dissassemble valves. Clean everything very well. Make sure head is not damaged. Remove valve guide seals. install new valve guide seals, new valves. Seat valves with valve grinding compound. clean well. instal valves in reverse order of dissasembly. Before putting head on, make sure number 1 cylinder is at top dead center position. install head using proper torque of 18 ft # in a spiral application rotation from the center outward in a clockwise direction. Then do spiral rotation again tightening bolts each one-quarter turn. Repeat the tightening process two more times only turning the bolts one-quarter turn each time. Use new head bolts. They are designed to stretch in the process of installation and are not to be re-used. Align cams to proper orientation then bolt into place. do not overtorque cam bearing cap bolts. Less than 5 ft # of torque can stretch these bolts. Snug them then tighten them 90 degrees. Then tighten them another 90 degrees (quarter turn). Snug them all then go back and tighten all of them a quater turn, then go back and tighten all of them another quarter turn. Install the cam idler and tensioner and install the cam belt. then install the intake, exhaust and all other items in reverse order of assembly. Do not turn engine over unless you are sure you have the cam belt on with the crank shaft pulley aligned at top dead center and the intake and exhauste pulley marks aligned to their proper marks with the cam belt properly tensioned. You can't be even one tooth off. This must be right before you turn the engine over! Remove spark plugs and turn engine over by hand two rotation clockwise using a wrench on the center bolt of the crank shaft pulley. Check that the timing of cams is still perfect. If not, correct, retension cam belt, double check timing positions again then rotate engine two revolutions. Check cam timing positions again. The timing should not change! The engine should turn over relatively easily. If it feels like it doesn't want to turn, don't force it. You may have the timing off and be pressing a piston against a valve. If you are at this point, then you need to remove cam belt and unbolt cam shafts to release all tension on any of the valves. return the number one cylinder to top dead center position and then reinstall the cams and cam belt. Once it is assembled and in time, then reattatch the rest of the components that were removed in dissassembly. Do this in reverse order of dissassembly. then connect battery and fill radiator fluid. Start car.

Aug 31, 2010 | Daewoo Nubira Cars & Trucks

Not finding what you are looking for?
1994 Mazda Protege Logo

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...