Question about 1994 Oldsmobile Cutlass Supreme

1 Answer

No brake lights

I want to know if i can wire the circuit at the blinker switch so i have brake lights with out buying the blinker switch and how do i get the blinker switch out

Posted by on

  • Kermit Potts Feb 28, 2009

    I have the same problem with my 94 cutlass. All the lights work but the brakelights, turn signals, flashers,and park/headlights work. But no brakelights. My ABS light came on then went out, but back on.If anybody knows something about this problem please help can't get my car inspected.

  • yadayada
    yadayada May 11, 2010

    no u can't.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Not a problem. Click on the link below and I believe this will solve your problem. I have just recently had the same problem and have fixed it on my car. The part cost $60.99 at advanced auto. The link has awesome pictures, steps, and the solution to your problem. Please let me know if this helps.

http://tss.likeabigdog.com/

Jason

Posted on Mar 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trailblazer no brake lights


As in the previous comments the brake switch wire goes to the turn signal switch and the third brake light. Since the 3rd brake light is working, the problem is in the turn signal switch. When the switch is centered, both brake lights have 12v to them. When you make a left or right turn, the switch has to switch connections between the turn signal blinker and the brake light circuit for the appropriate illumination of the proper light sequence. Buy a new turn signal switch and temporary plug it in. You will see the proper operation.

Mar 13, 2015 | 2005 Chevrolet Equinox

Tip

Both Lower Brake Lights Not Working


Check Brake Light Bulbs: All cars have three brake light bulbs that create the brake light illumination affect. If the lower two bulbs fail no lower brake light operation will occur. I know what you're thinking, you might say two brake lights at once? But in reality one brake light went out at a time and you did not notice. People only tend to notice something when they almost run into the back of your car to help persuade them to inform you the brake lights aren't working. Remove either of the brake light bulbs to confirm the bulb is ok or burned. After the bulb has been removed inspect the filament and replace if failed. If the brake light bulbs are ok continue to the next step.

Checking the Turn Signal Switch: Most American cars are designed to have the brake light switch wiring intergraded into the turn signal switch. Because the brake light bulb and the turn signal bulb are one and the same the turn signal switch interrupts the brake light circuit and installs the blinker signal circuit when the turn signal switch is activated. If this switch fails it will not allow the brake light signal through to the brake light wiring. To test for this condition a car repair manual is needed to test incoming and outgoing electrical current. If brake light switch power is present at the turn signal switch but not at any outgoing brake light wires the turn signal switch has probably failed.

on Dec 18, 2009 | Honda Civic Cars & Trucks

1 Answer

My brake light and blinker are out


Normally I would say check the turn signal switch, but you may have water in a wiring connector or a ground problem somewhere in the back of the truck.
The brake light and turn signal circuits go thru the turn signal switch before getting to the light bulbs.

Sep 20, 2012 | 2003 Mercury Mountaineer

1 Answer

I have a 2000 ford focus SE AND driver side brake light will not work...have only tried changing bulbs


Could be in your signal switch..Get someone to watch your brake lights,,and apply your brakes,,and move your blinker switch around and see if the brake light tries to come on..The brake light circuit runs through the switch...Even if the blinkers work it can have a short in the switch,...Then if that dont work,,take a test light and see if your getting voltage to the light...If so wiggle the wires on the light socket and see if there is a bad connection

Oct 05, 2011 | 2000 Ford Focus

2 Answers

I have a 94 Chevy C1500 and the right side brake light and blinker are not working. The tail light and reverse light work though, and the right front blinker works but it blinks twice as fast as it...


It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels the brake circuit so the turn signal can work with the brake pedal depressed.

However, a more likely cause would be a break in the YELLOW/BROWN wire at the rear of the truck. It is common for the connector to get corroded at the left rear frame area where the bed harness connects to the vehicle harness. If you have trailer connections spliced into the wiring harness, these connections are also prime candidates for corrosion. I would look there first. Inspect these harnesses thoroughly all the way up and into the tail light assembly.

If the wires under the back of the truck look good, then I would check for power coming out of the turn signal switch. The wire at the turn signal switch is plain YELLOW (with no brown tracer). It is Pin (M) on the turn signal switch connector. The front signal is a LIGHT BLUE wire at the turn signal switch Pin (H). If you probe these with a test lamp, they should both work the same except the yellow wire will be hot with the brake pedal depressed and the switch NOT in the left turn position. If there is no power at the switch connector, replace the switch.

May 13, 2011 | 1994 Chevrolet K1500

2 Answers

No brake lights on a 1996 ford contour ..3rd light and blinkers work fine I have ohm'd out brake switch on pedal and it is good ..blinkers on front and back both work.. no power to bulb socket on brown to...


The brake lights (excluding the 3rd brake light) go through the turn signal switch. It's possible there's a bad connection in the switch causing your symptoms. I would rule out the brake switch on the pedal, considering the third brake light works. Locate a wiring diagram for the brake light circuit, follow the wires into the steering column as far as you can and verify it's getting power up until the turn signal switch and verify no power is coming out of it. Once that's determined it's time to replace the switch.

Oct 04, 2009 | 1996 Ford Contour

1 Answer

Brake Lights and Hazard still dont work


TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY

Aug 29, 2009 | 1993 Chevrolet Astro

2 Answers

Pressing brake causing blinker issue


The trailer harness that was installed probably has a short inside the box that distributes power to the trailer pig-tail. Remove the trailer harness. You problem will be cured.

Jan 27, 2009 | 1999 Toyota 4Runner

3 Answers

Break lights


could be fuses email me with more info or questions at meanness628@aim.com

Sep 30, 2008 | 1997 Pontiac Sunfire

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...