Question about 2005 Chevrolet Equinox
it uses one washer fluid tank in the engine area that provide fluid for front/rear windows.
you could pull the rubber hose off at the bottom as a first check to ensure the washer pump does function to shoot fluid from the washer fluid tank.
if there's fluid still in it, look inside to ensure no forgein/gunk object is plugging the bottom inside.
check the washer fluid tank in the engine area and see if the rubber hose is still connected to it?
also check for no kinked or pinched point along the hose...just follow the hose to see it's not compressed flat which could be the cause of restricted washer fluid movement.
Posted on Sep 16, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment
Posted on Mar 22, 2009
first and it's sort of obvious... make sure the motor is off.... look for a cap at the front of the motor where the fan belt is... may even be labled power steering ... you add the fluid there
Posted on Jan 29, 2009
u will need to pull the washer fluid tank out and check to see if the tank motor that pumps the fluid is getting 12 volts when the washer switch is pushed, if it is the pump will need to be replaced, if it isn't then the washer switch is defective, this switch is part of the turn signal switch.
Posted on Aug 24, 2009
check the connections on the abs, behind the rotor by strut is the connection for the abs if the connector is loose or not properly affixed to the clip it sets off the abs trouble code or low speed saftey usually activates at slow speed under 5 miles an hour the connector and clip are part of the abs circuit--also recheck ur brake pads for binding and brake fluid level --if u get a trouble code have vehicle scanned some auo stores such as auto zone / advanced auto scan for free this will tell u which sensor or unit is causing problem
Posted on Nov 01, 2009
Tips for a great answer:
Sep 14, 2014 | 2005 Chevrolet Equinox
Dec 05, 2012 | 2005 Chevrolet Equinox
Sep 09, 2011 | 2005 Chevrolet Equinox
Jan 14, 2011 | 2005 Chevrolet Equinox
Dec 25, 2010 | 2008 Chevrolet Equinox
Aug 24, 2009 | Chevrolet Equinox Cars & Trucks
Mar 12, 2009 | 2006 Chevrolet Equinox
Jan 29, 2009 | 2006 Chevrolet Equinox
583 people viewed this question
Usually answered in minutes!