Question about 1985 Chevrolet S-10

1 Answer

Tail lights dont work.

My tail lights dont work but my brake lights do and my blinkers work too.

Posted by on

  • Anonymous Mar 16, 2009

    same problem different car. 98 lincoln town car. I know its not a fuse or the bulbs i have checked both....

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Meter your light plugs and spray some lube let me know whats happend and let me know year and style ok

Posted on Mar 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights dont work


Check for blown fuse, if the fuse is blown check the trailer wiring at the back for any bare wires.

Mar 03, 2013 | 1988 Chevrolet K3500

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

1996 chevrolet 1500 brake light and blinkers dont work


a bad turn signal switch the brake lights go threw the turn signal switch

Aug 26, 2012 | 1996 Chevrolet C1500

1 Answer

I have pontiac montana and the shop i got it from replaced and or riged the wire harness. recently both blinker lites are always on, on the dash. and when i push on the brakes my brake lites dont work and...


check for a bad ground wire for the tail lights. You are looking for a black ground wire near the bottom of the left rear corner of the car, inside. you may need to take the trim panel off to find it. if you take out the left tail light you should be able to follow the harness to where the black wires come out and a terminal is screwed to the body. turn on the hazard lights and when you get near the problem the lights will brighten and dim.

Aug 26, 2011 | 2000 Pontiac Montana

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

3 Answers

No dashboard lights or tail lights but I got Blinkers and brakes


most like u have a blown fuse most of the time in cars they connect the tail light and instrament lights to 1 fuse

Sep 18, 2009 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

Brake Lights and Hazard still dont work


TEST FRONT RIGHT BLINKER CIRCUIT AND REPLACE THE BULB,,WITH PROPER BULB...A DOUBLE CIRCUIT BULB IN A SINGLE SOCKET WILL DO THAT ALSO A SINGLE SOCKET BULB IN A DOUBLE SOCKET HOLDER....CHECK LEFT SIDE BULB FOR ACURANCY

Aug 29, 2009 | 1993 Chevrolet Astro

2 Answers

My tail lights dont work, its not a fuse, my blinkers and reverse lights work, its just my running lights and my brake lights that dont, any suggestions?


check the wire harness that runs from inside the trunk on the drivers side follow it down to the tail light and make shure the wires are not damaged or unplugged remove cover on the drivers side inspect the bulbs the holders and the wires and dont forgt to retighten all grounds that you find on your travels this should get the rear tail lights working also check the brake pedal switch up on the metal part of the brake pedal arm follow it up tp the brake pedal switch and acuate the switch by hand and check the wire voltage coming in and going out when pressing the brake pedal ok give this a shot

Jul 21, 2008 | Ford Mustang Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...