- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
May 8, 2004 - 19 posts - 9 authors
Auto Trans not shifting correctly from 2nd to 3rd Under the Hood. ... Become an EliteExplorer. Lithuania. 1999 5.0. Join Date: Jun 2003. Posts: 107 ... When this happens, the transmission will skip to the next gear like you said.
Jan 13, 2013 - Uploaded by James Burns
... Doctor, explores the causes of harsh shifting in automatic transmissions. ... Early diagnosis is important to ...
Irealy need more ineormation It could be an electrical problem or a mecheicanal problem with the shift cables if you have that or a switch that senses if its in 4 x4 or a vacuum issue if its vacuum opperated
You should change trans & power steering fluids
every 30,000 miles on all vehicles,if you don't from
when the vehicle was new,you will have problems
Changing the trans fluid only restores the heat removal
properties,it does not fix a single thing, at all
The shift stratagy is determined by several things
Check that the TPS Sensor is working without worn
spots inside it.
No adjustments to make
You could have the sensors checked with a scanner
while driving it.
You have a delayed 1-2 shift
The are servos that apply bands etc,I think
in the end you will be pulling the trans to rebuild
it,as you will be chasing several possibilities, that I
believe will be hardened internal seals from time,
wear & mostly heat
You didn't mention mileage or other past issues
with the trans etc or if your the second owner
crawl back under veh have somone shift trans with wheels blocked engine off look to see if shifter is still connected to trans. if is look too see if moves linkage all through ranghes to low .if it does remove trans pan too see if it moves inside trans.let me know ,,, If you took it to a shop thats were they would start.