Question about 2007 Pontiac G5 Gt Coupe

1 Answer

Fuses So i posted a while back that my car wouldn't start after i jumped a buddies car... it turns out it was a fuse... i parked said vehicle last night and when i woke up this morning to start the car it did the same thing... instead of turning over it just didn't do anything... no click nothing... the dash lights didn't even dim.... if it is the fuse what could be causeing the fuse to blow and should i take it in and try to trade it in or just deal with it?

Posted by on

  • michael Feb 23, 2009

    the first time i was told that is was fuse number 16 (climate control system, ingnition) fuse

  • David Shaub May 11, 2010

    What fuse is blowing?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

You have a loose wire causing a short to ground somewhere. If it isn't a fuse in the block, it is the fuseable link on the battery.

Posted on Feb 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


When jumping, or anything else electrical on a vehicle, always connect negative LAST. You could have fried the fuse or the radio. Check fuse first. On newer vehicles jumping is dangerous and can cause system failure.

Mar 10, 2013 | 2002 Saturn VUE

1 Answer

Heard loud pop when trying to start, wouldn't start and lost all lights and radio....replaced battery this afternoon, still got nothing. No lights,no radio not turning over at all. Questioning fuse...

Sounds like a main fuse has blown. Might be an inline type, a pin type or a fuse link. Usually near the positive post on the battery or under hood
fuse box.

Jan 21, 2018 | 2003 Toyota Tacoma

1 Answer

Car won't start.. It just clicks. Tried jump starting it but it wouldn't do anything but click.

check for corrosion at the terminals of the battery and also the starter, if thats clean ,, your starter may be stuck, if you remove the starter you can bench check it by attaching a jumper cable (positive side) to the post for the starter, and tapping the negative side of the Jumper to the case of the starter,, it should Jump into position, Prior to doing that check,, look for any blown fuses, but if its clicking,, Its trying so I doubt its a fuse issue

Jun 21, 2011 | 1994 Dodge Spirit

1 Answer

2004 Range Rover HSE won't start. Last week i had problem starting the rover. I checked the starter and the relay and was hoping that it could be one or the other. But this week i noticed that the...

Sounds more like a low voltage current flow in the ground circuit(harness).
Or the voltage output from ignition switch.
If No check engine light ever came on, or is not on, then the PCM/ECM is telling us there is No fault anywhere,
TCM-automatic transmission computer- uses VSS- vehicle speed sensor, to know when to shift gears.
A low input power to any of these control modules would result in lack of performance
Rough shifting could be caused by low fluid level

1. Check all fuses
2. ensure the battery cables are tight.
3. Check negative from battery has ground to frame rail
4. Check Transmission Fluid Level.

If you notice other symtoms, or situation continues, please post back

Mar 02, 2017 | 2004 Land Rover Range Rover

1 Answer

My 2002 Mustang is stuck in park...what to do?

Sounds like your car is equipt with a brake shift interlck which means that you cannot change the vehicle out of park unless the brake pedal is pushed in. There are a couple of things that could be wrong. the interlock switch could be bad or your brake lights are not working. This will cause this. Now for what you really want to know. To get your vehicle out of park you have to do the procedure: With the ignition switch in the on position and the brake pedal depressed, apply the parking brake. Then turn the key to the LOCK position and remove the key. Then put the key back in and turn it to the OFF position. Then push the brake pedal in and at this point you will be able to put the vehicle into the neutral position and be able to start the vehicle and put into the gears of your choice. Here are some things you can check that may be causing this and that is fuses. There are 3 fuses to check. they are in the fuse panel located inside the vehicle to the left of the steering wheel by the brake pedal. I gave you a diagram of the layout of the fuses below. The fuses you want to check will be the number 33 fuse which should be a 15 amp fuse and is for the stop lamps. The second fuse you want to check is the number 35 fuse which is for the shift lock acuator and the last fuse which is the most common to cause this is the number 41 fuse which is for the brake lamp. I hope you were able to understand my instructions and I hope this helps you. Good luck.


May 27, 2011 | Ford Mustang Cars & Trucks

1 Answer

Change battery,had starter tested,and check fuses in both places cant start my 04 exployer

Appears to be a cranking isuue. Ford uses a starter relay an normally mounte under hood on left fender.. Battery + cable will ytake yo to it. Nake sure vehicle is in park or neutral. The relay has two large posts. momentarily jump the two and see if it cranks. If it does, Momentarily jump the post from the battery to the small post that has a push on wire connectorr. SShould crank that small wire is the one energize when you turn the key. Ck the wire for current if t he engine cranks in bith of your jumo tests. Good Luck -Ned

Sep 26, 2009 | 2004 Ford Explorer

1 Answer

I can not find the neutral safety switch on a 2000 buick park ave

Any chance your vehicles have a security/alarm system. Disconnecting battery on some, will arm it sometimes & not allow it to run. Using key to unlock door, on driver & passenger side have been known to work on some vehicles, but if not, a call to dealer should help.

May 31, 2009 | 2000 Buick Park Avenue

1 Answer

Wont Crnk

did ya get it goin???? havent heard from you???????

Oct 26, 2008 | 1995 Jeep Cherokee

Not finding what you are looking for?
2007 Pontiac G5 Gt Coupe Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides