Question about 2005 Saturn ION

1 Answer

I need to removed the drivers side door panel to put the window back on track

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What type of car...
usually held on with clips,,,
make sure that you remove the screws that hold the arm rest on.. some of these are under press in covers. also the adjuster for the the mirrors, there might be a philips screw there,, as well as the adjuster knob might have to come out

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

The drivers side window is off the track and now im having problems getting it closed


you can sometimes get it back in by lowering the window all the way down, pry or hold open the felt seals on the door, and look into the door with a flashlight, you might be able to get it back in track by moving the window back and forth (be carefull not to strain glass or it will shatter).. may have to remove door panel to put glass back on track.

Dec 15, 2013 | 2003 Chevrolet Malibu

1 Answer

I need to know how to get the drivers side door panel off. My window is off track and I need to fix


how to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
thats it reverse to put back on

Nov 25, 2010 | 1997 Ford Expedition

1 Answer

How do I remove driver side door window


You need to remove inner door panel by unscrewing the screws on inner door handle and take a flat screw driver wedge it between the panel and door use flash light to see the clips along the sides and lower part of door and pry them free. then look through the inner door cut outs to find window track. Once you see it use ratchet or screw driver and loosen the window free form track. Then carefully remove window.

Apr 01, 2010 | 2003 Mazda MPV

1 Answer

I have an 1998 Oldsmobile Intrigue and the driver side window is off track, how do i put it back on track?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then pull back the weather seal and you will be able to put it back on the track. You will most likely need to buy some clips to secure it back on

Oct 21, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Need to remove and replace the driver side door panel


Could be a bad switch, bad window motor, or clutch in window motor, ccould also be that the window itself jumped track.

Jun 04, 2009 | 2000 Buick LeSabre

1 Answer

Rear driver's side window is off track. i need to know how to remove the door panel to get back on track. window motor sounds like it is working in both directions 2001 hyundai sonata


Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.

Apr 18, 2009 | 2001 Hyundai Sonata

1 Answer

Window off track driver side 1997 sebring


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 23, 2009 | 1997 Chrysler Sebring

1 Answer

REMOVING A DOOR PANEL


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 02, 2008 | 2002 Buick Rendezvous

Not finding what you are looking for?
2005 Saturn ION Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...