Question about 1999 Chevrolet Monte Carlo

1 Answer

Steering column locked

Key won't turn in the steering column to start the car I have a 99 chevy monte carlos LS and the key is not going into the ignition, when I can get it (with a lot of fiddeling) it does not want to turn

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

When you get the key into the ignition, Try turning the wheel to one side or the other as you turn the key. Some vehicle's steering columns will "lock" if the wheel is turned to tightly when the ignition gets turned off. Hope that helps.

Posted on Mar 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to correct a 2005 chevy monte carlo high beams from staying on


About 17,700 results (0.74 seconds) Search Results

    My high beams won't go off!! - Monte Carlo Forum - Monte Carlo ...

    montecarloforum.com > ... > General Forums > General Monte Carlo Talk
    Jun 8, 2012 - i flipped on the high beams last night and i think that switch in the column broke. ... My high beams won't go off! ... 2003 Chevrolet Monte Carlo. Help!! Need to get headlights working. - Monte Carlo Forum ...
    Jan 1, 2012
    Repair Guide: List of Common Monte Carlo Problems and Solutions ...
    Aug 9, 2011
    Fog lights not working, High beams stay on?
    May 9, 2011
    More results from montecarloforum.com

Jan 30, 2016 | 2005 Chevrolet Chevrolet Impala LS

1 Answer

Hwo do I change the ignition lock cylinder in my 99 Monte Carlo?


You will have to remove all the cowlings from the steering column to access the ignition lock and switch. With the correct key inserted and selected to, probably, the ACC position, you should be able to push on either a pin or a tongue that protrudes from the switch into the housing and the pull the whole lock/switch mechanism out.

Apr 30, 2011 | 1999 Chevrolet Monte Carlo

1 Answer

Steering Wheel wont lock on 2002 Chrvy Monte Carlo 3.4L


Well,
You will have to disassemble the steering column and remove yours key cylinder and have a new one made by GM .
The cylinder is where you put your key in to start.
That part has become defective

Jul 26, 2010 | 2002 Chevrolet Monte Carlo

1 Answer

I have a 1995 chevy monte carlo that I hae


Do any dash lights come on when you turn the key on? Does it crank over?

Jul 04, 2010 | 1995 Chevrolet Monte Carlo

2 Answers

03 chevy monte carlo can't turn key


Tumblers are going bad. Get a locksmith or dealer to replace.

Apr 15, 2010 | 2003 Chevrolet Monte Carlo

1 Answer

2006 Monte Carlo Steering wheel won't lock and car won't go into gear. Automatic. Car will start thought


in t he steering column there is a machanel bar that slides up and down this works with the ignition key eather the key part is broken of the shaft that moves the lever to the trans is jamed or broken

Feb 25, 2010 | 2006 Chevrolet Monte Carlo

1 Answer

96 chevy monte carlo 3.1 wont start


check to see if the wire is broken for the passlock/passkey system in the ignition lock cylinder, its common for the copper wire to seperate inside the insulation, when you tilt the column it could have been pushing the wires together enough to touch inside the insulation

Jun 18, 2009 | 1999 Chevrolet Monte Carlo

1 Answer

2006 monte carlo key stuck in ignition by tamquinn


Is the steering column locked? If so try jiggling steering wheel back and forth while trying to remove key. It could be the locking pin in the column preventing the key from being turned far enough to be removed.

Dec 29, 2008 | 2006 Chevrolet Monte Carlo

1 Answer

1995 Chevy Monte Carlo


you need to take the upper and lower steering column covers off, should be 3 screws in bottom, take tilt steering lever out if neccessary, it is a 2 peice cover, take apart, change switch and put back together

Nov 03, 2008 | 1995 Chevrolet Monte Carlo

Not finding what you are looking for?
1999 Chevrolet Monte Carlo Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...