Timing marks on a 2002 f150 4.2 engine - 2002 Ford F150 Regular Cab

there is a mark on the crankshaft sprocket to marry with the mark on the engine casing and marks on the 2 cams behind the sprockets to line up with the marks on the cm carrier/cylinder head

What, you want someone to write a 5 page personal manual for you on how to do it? Do you not have Google in your neighborhood?

There is no way to set the timeing, It is preadjusted buy the Timeing belt when it is installed on the engine Buy marks that are on the (Engine) Block,

please download the service manual:
see how to adjust the timing mark for your model:
http://www.repairmanualdownloads.com
sincerely.ernesto cuadra

1. Remove the timing belt.
   

   Crankshaft and camshaft timing marks-2.4L engine
   

   Timing belt tensioner-2.4L engine
   

   Camshaft sprocket alignment-2.4L engine
   

   Timing belt installation-2.4L engine
   

   Timing belt tension adjustment-2.4L engine
   

   Timing belt tension verification-2.4L engine
   
   

you shoud aligin from mark opn the timig gear and mark on the crank(ther is a bolted port on the exhoust side.)

necesito marcar jeep liberty 2002 3.7

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams and Photos with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams, instructions and photo's for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2002/make/isuzu/model/trooper/2002_isuzu_trooper_timing_belt_diagram_marks.htm

timing info on a 2002 landrover freelander v-6

Turn crankshaft so that timing marks on belt pulley are aligned with marks on engine . The 'I' on intake pulley is on top and the 'E' on exhaust pulley is also on top.Align crankshaft pulley with mark on engine.If your timing belt is broken then major damage to the engine has occored and kiss it good bye.