Find and remove two screws visible on the door panel, including underneath small covers. Pop them off with a small screwdriver. Lift front edge of control panel, then pull forward and lift out. Pull upper door panel from door. Disconnect courtesy light connector. Disconnect door open handle cable assembly and door lock cable assembly. You might need to lift panel and twist to get it off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Feb 2, 2012 - Uploaded by 1A Auto Parts
How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...
Apr 2, 2015 - Uploaded by 1A Auto Parts
http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain
Hi Paul, I'm glad to help! Most problems with door handles that won't open the door is broken parts inside the door. Pull the door panel off and move the handle while watching inside the door to see what is broken. Once you've found the broken part, simply replace it. Hope this helps and have an awesome day Paul.
probably not. most inside door handles are push on and held with a spring clip that requires a flat tool that slides between the handle and the plastic washer or the plastic plug in the center of the handle prises out and ther will be a small screw to remove then the handle slips off. Normally the screw has a 8 mm head or a philips screw recess
Pop out the inside door panel to access the handle from inside. Take off the cotter pins holding the rods to the latch, take out the screws that hold the handle put in new handle and the rods with the cotter pins and reinstall the inside door panel.
your linkage rod to the outside door handle has disconnected , if you open up the door panel to access the lock linkage rods you will find the rod that is disconnected . There is a plastic bushing the rod is secured with if it is broken you must replace it , if the rod will not stay in place replace the bushing , hope this helps you out
You will need to remove the door panel from the inside to gain access to the door handle bolts on the inside of the door panel. There should be two nuts to remove and then the door handle will come out.
Can you open the door with the inside handle? If you can, the problem is probably a broken plastic fitting inside between the outside handle and the door latch. There are door panel removal tools available at your local parts store that look like short handled wide bladed pry bars. You could get by with a good stiff putty knife if needed. Take off the arm rest, window crank, and speaker grill if you have aftermarket speakers. Slide the door panel removal tool under the edge of the door panel and CAREFULLY pop the clips loose from the door frame. You could always leave the window open and do the "Dukes of Hazard" thing, but then you would have to change the paint scheme.