Question about 2000 Chevrolet Blazer

1 Answer

Fuel system fuel pump replaced last year quit runing quit three weeks ago disconected battery pulled breather put gas down carb took afew times to get primed but it worked ran fine for another three weeks couple trips to atlanta and chattanooga then died again .Will doing the same prossess work again and what is causing this.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

It may work again but that is only temporary it sounds like the fuel filter is clogging up

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I was driving my 1994 isuzu rodeo and lost complete power.Got a few jumps and truck wont start.sounds like it wants to start when i turn key over.I also put gas in and still nothing


run the fault codes
check for cam/crank position sensors failure, immobilizer failure , pump operation
could be a failed ECM
have the battery load tested as it may be the original fault and jump starting may have caused a power surge and damaged the ECM

Feb 27, 2016 | Isuzu Cars & Trucks

1 Answer

Two weeks ago i was driving my Sierra pick up deisel 6.5 liter and all of a sudden it felt like my turbo surged and and the engine quit. I was able to pull over and restart it after a few turns and it...


sounds like the fuel driver module is on it's way out
mounted on side of fuel pump square box black in colour held on with 4 screws
and silicone style gasket
i havs replace quit a few over the years runing a fleef of small bus with 6.5 diesel engine

May 25, 2011 | 1992 GMC Sierra C3500

1 Answer

1996 dodge dakota 3.9 engine quit running when we do the ignition test it gives us a code of 1255 what would that mean. It will run if we put gas down the carb.


i`m not sure what the code meaning is but if you put gas down the throttle body and it runs then you have a fuel problem which this code may refer to.this year of truck is fuel injected throttle body.it could be a fuse,fuel pump relay,fuel pump,plugged fuel filter,stuck open fuel pressure regulator not building enough pressure,wiring for fuel or pump system or even a computer(ecm) problem.

Apr 21, 2011 | Dodge Dakota Cars & Trucks

2 Answers

My 2001 4Runner stopped running immediately after refueling and after my son letting it get real low in gas. My son stated thet the car had exhibited this behavior earlier during the day, but he was able...


When you say you put the fuel in the "carb"and it started but won't stay running: where did you put it ? Your 2001 4 runner would be fuel injected so i think you might have put it in the throttle body, but i haven't had much luck getting a fuel injected car to start that way. Do you have a check engine light on and/or have you had someone put an obdII code reader on it? If no codes are present and you are certain that it is fuel then I would first check fuses and relay's for those related components, make sure your fuel pressure is what it should be(35-55 psi) for start/ idle and finally most late model security systems (pass-key,coded key) disable fuel injection system, just make sure you are using the master key for the vehicle. Hope this helps !

Aug 12, 2010 | 1995 Toyota 4Runner

1 Answer

My 1988 Ford Bronco 5.0 has been stalling / acting like its run out of gas. (Has always run great before) I know it has plenty. Today 7.28.10 It stalled twice, first time it did it had at least 1/4 tank,...


You might have what is called vapor lock. The fuel gets so hot that it boils in the fuel pump or the lines. Do this test spay water on the fuel pump to cool it off . ( this only works for a few minutes before it gets to hot and vapor locks again ) If you can Keep the engine heat Off the lines and the Fuel pump it might help. If you have metal fuel lines near a heat source rap them with something such as rubber fuel line sliced down the middle to keep the heat off them If you are using an aftermarket electric fuel pump relocate it down low near the gas tank ( they work better pushing than pulling ) away from any heat source such as exhaust If your using the stock fuel pump try replacing it with a new one it might be getting weak Replace the fuel filter while your at it.

Jul 28, 2010 | 1988 Ford Bronco

2 Answers

1987 S10 2.5L 4 cyl.


Check the spark either with an inductive timing light, or with an old spark plug in a wire you disconnect and lay on the engine.
It is probably the coil or ignition modules, which most parts places will check for free, if you bring it in.

Jul 25, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

Fuel Pump


Well dew, the worst thing for a car is to sit unused for a long time. After 3-4 years, the gas is bad, and you probably need to take the entire fuel system apart and clean it, or replace it. That would include from the carb/or injectors all the way back to the gas tank. You will most likely find serious brake issues also. The brake system will need disassembly to clean or replace/rebuild brake calipers, brake cylinders, and flush out the brake system and add new fluid. I have had cars sit for a year and start, but 3-4 years is a LONG time. Brakes tend to seize up after that much time. Good luck with your project, I hope it goes well.

Mar 16, 2009 | 1993 Nissan Pickup

2 Answers

Need to replace fuel pump for my 1998 dodge ram 4x4.


there is an easier way to replace the fuel pump than dropping the tank. I replaced mine last week in about 30 min. I simply took the bed off only six or eight bolts depending on bed size, a few tail light wires and filler neck and over flow. might need someone to help get the bed off though.

Mar 13, 2009 | 1998 Dodge Ram 1500 4WD

4 Answers

My 1993 chevy 1500 Silverado truck suddenly quits


I put a new fuel pump, fuel filter, and a fuel pump relay and the fuel pump is still not coming on. I am not getting any fuel. Can you please tell me what it might be.

Mar 08, 2009 | 1993 Chevrolet C1500

1 Answer

Car won't idle after I gas up


hi there! sorry to say you got a sonata!! i was a master tech 4 hyundai! check your fuel pressure? replace fuel filter and check the release valve on the the fuel filler neck and the fuel tank breathers.

many thanks

Dominic Hill

Dec 10, 2008 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...