How to replace transmission

How To Install Replace Transmission Cooler Lines 2001-06 ...

? 5:45
https://www.youtube.com/watch?v=SFEXmxxBMK8
Oct 31, 2013 - Uploaded by 1A Auto Parts
How To Install Replace Transmission Cooler Lines 2001-06 ... In this video, 1A Auto shows you how to remove, replace and install leaking or broken Transmission Cooler ... How To Install ReplaceDo a Front Brake Job 2001-06 Chrysler ... 2003 Dodge Ram 3500 trans cooler replacement how to 11-24-12 ...

Search DODGE MAGNUM Cooling > Transmission Oil ...

www.factorychryslerparts.com > ... > Transmission Oil Cooler, and Lines

DODGE MAGNUM Cooling > Transmission Oil Cooler, and Lines. ... Please let us know what we can do to achieve this goal. ... Our inventory covers the following years of MAGNUM: 2005, 2006, 2007, 2008, ... Click X to remove the keyword.

Leaking Transmission Cooler Line Replacment Recommendations ...

www.dodgeintrepid.net > ... > General Discussion (First Generation)

Automatic Transmission Fluid Capacities Automatic Transmission 3-Speed Pan Removal and Replacement 4.0 quarts After Complete Overhaul 6.9 quarts When draining or replacing torque converter, more fluid may be needed. Manual Transmission Fluid Capacities Manual Transmission 4-Speed Automatic Transmission Not Owner Serviceable Complete Drain and Refill 2.0 quarts

No such thing there may only be 3 cars in the entire world that would have to program a transmission replacement if and only if needed its to clear any transmission codes out of the computer but if the problem dont exsist anymore the computer mil lamp goes out anyway

No you won't need to replace the transmission the Digital Transmission Range Sensor isn't inside of the transmission and can be replaced fairly easily.

Here is a link to the instruction for the replacement

How to replace a DTR sensor

P0740 is the Torque Converter. It is actually attached to the transmission. When I was getting code PO740, I had to have the torque converter replaced. PO700 is the Transmission Control Module. This is not inside the transmission but rather part of the control side of the transmission. You did not say how many miles you have on it, You did not say whether you have ever replaced the transmission fluid before, I do not trust mechanics, I learned how to work on my vehicle myself. I cannot replace a transmission or a motor but, I have 330K miles on my Pentastar 3.6L Engine and original transmission, You must change your transmission fluid but if you went over 100K miles and never replaced it, you have more than likely caused the transmission to have internal failure, Some people do not believe in replacing the transmission fluid. The reason you must change it, is because the fluid breaks down and cannot cool the transmission down. After you change it at 100K , I myself change mine then after another 50K then after another 20K and I change it if I notice even the slightest slip in the transmission,

Yes the engine has to be out,its not a easy task to replace transmission.You will required professional tools and wrench/ratchets.
Also its very time consuming.

For your help,i suggest you few help links with accurate solutions,showing how exactly to replace transmission and other transmission components.
---------------
Click the link below:-----

HOW TO REPLACE A MANUAL TRANSMISSION

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-manual-transmission.html

--------------

HOW TO REPLACE TRANSMISSION COOLER LINES

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-transmission-cooler.html

-----------

HOW TO CHECK AUTOMATIC TRANSMISSION FLUID LEVEL

http://schematicsdiagram.blogspot.com/2011/07/how-to-check-automatic-transmission.html

------------

HOW TO CHANGE AUTOMATIC TRANSMISSION FLUID AND FILTER

http://schematicsdiagram.blogspot.com/2011/07/how-to-change-automatic-transmission.html

HOW TO REPLACE A TRANSMISSION MOUNT

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-transmission-mount.html

------------------

DSG automatic transmission problem

http://whatisbyme.blogspot.in/2012/07/dsg-automatic-transmission-problem.html

--------------

Transmission problem?

http://schematicsdiagram.blogspot.com/2012/01/transmission-problem.html

---------------

2004 Chrysler 300m: Transmission Relearn Procedure?

http://repairhelpcenter.blogspot.in/2012/06/2004-chrysler-300m-transmission-relearn.html

----------------

How do you change transmission fluid on Pontiac?

http://schematicsdiagram.blogspot.in/2012/03/how-do-you-change-transmission-fluid-on.html

-------------

Filling Transmission fluid on 2001 Volvo c70?

http://schematicsdiagram.blogspot.in/2012/02/filling-transmission-fluid-on-2001.html

----------------

2002 Isuzu trooper Transmission fluid fill up?

http://schematicsdiagram.blogspot.in/2012/02/2002-izusu-trooper-transmission-fluid.html

-----------------

AUDI V8 TRANSMISSION FLUID

http://whoisbyme.blogspot.in/2012/07/audi-v8-transmission-fluid.html

Where to fill Transmission Fluid on 2001 ford focus

http://technoanswers.blogspot.com/2012/10/where-to-fill-transmission-fluid-on.html

--------------

Coolant enters in transmission on Toyota Land cruiser?

http://schematicsdiagram.blogspot.com/2012/01/coolant-enters-in-transmission-on.html

--------------------

Engine stumbles and shuts off in forward gear on Toyota Land Cruiser?

http://schematicsdiagram.blogspot.com/2012/01/engine-stumbles-and-shuts-off-in.html

--------------------

Car engine Overheats and transmission starts slipping?

http://schematicsdiagram.blogspot.com/2011/12/car-engine-overheats-and-transmission.html

----------------

Manual Transmission Clutch System Failures?

http://repairhelpcenter.blogspot.com/2011/11/manual-transmission-clutch-system.html

---------------------

Automatic transmission will not go into high gear?

http://howtobyme.blogspot.com/2011/11/automatic-transmission-will-not-go-into.html

------------------

Transmission fluid gets into radiator?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fluid-gets-into-radiator.html

---------------

Dodge Anti slip System is not operating?

http://whatisbyme.blogspot.in/2012/07/dodge-anti-slip-system-is-not-operating.html

--------------

How to check Transmission fluid on 1996 Chevrolet Camaro?

http://schematicsdiagram.blogspot.com/2011/12/how-to-check-transmission-fluid-on-1996.html

-------------

Transmission fault light on car dash?

http://schematicsdiagram.blogspot.com/2011/12/transmission-fault-light-on-car-dash.html

-----------------

Filled T-IV fluid instead of WS transmission fluid?

http://repairhelpcenter.blogspot.com/2012/01/filled-t-iv-fluid-instead-of-ws.html

----------

Manual transmission very hard to shift from one gear to another?

http://repairhelpcenter.blogspot.com/2012/01/manual-transmission-very-hard-to-shift.html

-------------------

Bell housing and transmission will not come apart on 1996 Toyota Tacoma?

http://repairhelpcenter.blogspot.com/2012/01/bell-housing-and-transmission-will-not.html

--------------------

How to Add transmission fluid on 2002 Isuzu AXIOM?

http://technoanswers.blogspot.in/2012/02/how-to-add-transmission-fluid-on-2002.html

---------------

Chrysler Cirrus Auto Transmission Swap?

http://whoisbyme.blogspot.in/2012/06/chrysler-cirrus-auto-transmission-swap.html

These details will help.

Thanks.

Replace radiator and transmission fluid cooling unit. That's a bad leak!

More then likely you are experiencing a transmission problem, an internal problem that may need to be repaired by either having your transmission rebuilt by a reputable transmission overhaul shop or replaced by a transmission that has already been rebuilt and in stock for your vehicle.
Indications of this type of problems are, burnt transmission fluid a burnt smell as well as a burnt coloration of the fliud(not bright red like it is in the can) and a least likely problem that may require the transmission being serviced by means of a transmission fluid service change and believe it or not a transmission filter replacement, at times these filters clog with dirty fluid and debri from the transmission clutches,etc, and create a no go condition in the hydraulic workings of an automatic transmission.
Replacement transmission costs can be as high as $1500.00/rebuilding of your transmision depending on what "hard" parts need to be replaced can start at $800.00 and go upwards of $1500.00.
A transmission service can be the least expensive of the evils starting from $49.95 to upwards of $100.00 if the shop flushes the transmission by means of a hi-tech flush machine attachment.

1. Disconnect the battery negative cable.
2. Raise the vehicle. Support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Disconnect the range selector cable from the transmission bracket and from the transmission range select lever. Refer to Shift Cable Replacement .
4. Remove the rear propeller shaft. Refer to Rear Propeller Shaft in Propeller Shaft.
5. Support the transmission with a transmission jack.
6. Remove the transfer case if equipped. Refer to the appropriate Transfer Case Replacement in Transfer Case:
• Transfer Case Replacement (Selectable Four Wheel Drive) . • Transfer Case Replacement (Auto Four Wheel Drive ) . • Transfer Case Replacement (Manual Four Wheel Drive) .



7. Gasoline Engine--Remove the following components:
7.1. Two bolts 7.2. Two washers 7.3. One nut 7.4. The transmission to engine brace



8. Diesel Engine--Remove the following components:
8.1. Two bolts 8.2. Two washers 8.3. One nut 8.4. The transmission to engine brace
9. Remove the transmission rear mount.
10. Remove the frame crossmember.
11. Remove the exhaust pipe from the exhaust manifolds. Remove the muffler assembly from the exhaust pipe, if required. Refer to Exhaust System.




12. For the 5.0L Gasoline Engine: Remove the six bolts securing the converter cover to the transmission.
13. Remove the starter. Refer to Starter Replacement in Engine Electrical.
14. For the 4.3L Gasoline Engine: Remove the dust plug at the end of the starter mounting port in order to gain access to the converter bolts.




15. For the Diesel Engine and 7.4L/5.7L Engines: Remove the four bolts securing the converter cover to the transmission.
16. Mark the flywheel and the torque converter alignment.




17. Remove the bolts that attach the torque converter to the engine flywheel.




18. Remove the transmission vent hose.
19. Disconnect the wiring harness connectors from the vehicle speed sensors and from the park neutral position switch.
20. Remove all vehicle electrical harness wires, harness clips, tubes, and brackets that may interfere with the removal of the transmission.
21. Remove the fluid fill tube and the fill tube seal from the transmission. Refer to Filler Tube Replacement .
22. Plug the fluid fill tube opening in the transmission.
23. Disconnect the transmission oil cooler pipes from the transmission. Refer to the oil cooler pipe quick connect fittings removal procedure in Oil Cooler Hose/Pipe Replacement .
24. Plug the transmission oil cooler pipe connectors in the transmission case.
25. Install the J 21366 in order to keep the torque converter from sliding off of the transmission turbine shaft.
26. Support the engine with a suitable jack stand before removing the transmission from the engine.




27. 5.0L and 5.7L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.




28. 4.3L Gasoline Engine: Remove the studs and bolts securing the transmission to the engine.
29. Pull the transmission straight back from the engine.
30. Lower the transmission using the transmission jack.
31. Flush the transmission oil cooler and the pipes whenever you remove the transmission for overhaul, or replacement of the torque converter, the pump, or the transmission case. Refer to Transmission Fluid Cooler Flushing .
32. Clean the transmission case using a solvent dampened cloth. Do not allow solvent to enter the transmission.
33. Air dry the transmission.
34. Clean all hardware and the flywheel cover using solvent. Air dry all the parts.
35. Inspect all the components for wear and damage.
36. Inspect all the seals and the fittings for signs of wear.
37. Inspect the torque converter for stripped or broken weld nuts.
38. Inspect the transmission case for cracks.

replace the torque converter or try to get the transmission flushed first by a professional auto trans outfit