NEED RADIO CODE ON A 1996 ISUZU OASIS - Oasis Isuzu Cars & Trucks

I would say a car breakers yard, or you can probably get a Haynes repair manual for about $15 at your auto parts dealer.

Call GM dealer with the VIN for code to the radio. Be prepared to supply additional info....SMP

You will need the factory manuals for this diagram, we do not have them due to copyrighting.

crankshaft position sensor

ABS light always on means your ABS is not working properly.Radio flickering : you need to check and cover all ***** electric wiring property by electric tape.Noise in turn signal : please on your car hazard and check all integrator working fine, if not replace fuse bulbs, the problem will be fixed.Hazard Button = (http://www.2carpros.com/images/articles/electrical/lights/emergency_flasher/emergency_flasher.jpg)

your low beam headlights need to be replaced

it should be around 50 psi for a good constant pressure

You can see the timing marks on the camshaft and on the crank shaft. Be sure their aligned and you will be good to go. If this was at all helpful, please rate. Thanks for asking.

Either you or a previous owner programmed a security code into the radio. This keeps a potetial thief from installing your radio into another vehicle. If you don't know the code that was programmed into it, then you will have to take it to your local dealer, where they can insert a universal code (the identity of which they will not release to anyone) which will override and/or erase any other code. Once they do this, you will usually have the option of inserting your own code. (like using or changing your PIN) DONT lose it, or you will have the same problem the next time you have a dead battery.

The Isuzu has a timing pump driven water pump, so if the timing belt is due to be replaced, both jobs are normally done at the same time along with replacing the timing belt tensioner pulley. It'a an "interference" type engine that bends the valves if the belt breaks and ruins the engine. The reason the shops want $700 is because they're doing a complete timing belt replacement to get to the water pump.