Question about 1992 Pontiac Grand Prix

2 Answers

O2 sensor? im wondering were the o2 sensor is located?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

The o2 sensor should be located on the exhaust near the headers

Posted on Feb 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

The O2 sensor is located in the exhaust pipe prior to the catalytic converter. You'll have to get under the vehicle to see it or replace it.

Posted on Feb 23, 2009

4 Suggested Answers

  • 169 Answers

SOURCE: Upstream O2 sensor location?

That is the first sensor closest to the engine. The downstream sensor is the one behind the converter.
Good luck.
Please rate this response , and let me know if ya need more help!

Posted on Aug 31, 2008

  • 112 Answers

SOURCE: O2 Sensor replacement

most cars have only 2 o2 sensors one is below the exaust manifold and the other one near the catalytic converter

Posted on May 27, 2009

  • 4102 Answers

SOURCE: o2 sensor location on 1996 pontiac grand am 2.4l

hi,
CLICK HERE

clicking above will take you to a site that should give you the info you need.

Let me know how you get on or if you need further assistance ok

Posted on Nov 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 chevy impala, my engine code is reading p2a01 im wondering where exactly the location of this 02 sensor is?


I don't know what p2a01 is, but the O2 sensors are in the exhaust pipe before and after the catalytic converter.

Nov 23, 2015 | 2007 Chevrolet Chevrolet Impala LT

Tip

How to Replace the O2 Sensor in Mercury villager?


O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) There is primary and secondary O2 sensor connector.
2) Do the replacement of the O2 sensor only when the engine is completely cool.
3)You will see primary O2 sensor on the exhaust manifold.The secondary O2 sensor is located after the catalytic converter.
4)Put the car on jack stands on the rack, this will give you proper sensor location in the car.
5)Remove the O2 sensor with a socket wrench and O2 removal tool extension. Turn the O2 sensor counterclockwise to remove.
6) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
7)The spray will make it come out easily.
8)When the O2 sensor is getting removed, some of the wiring's will also come out.
9)Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
10) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
11) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.

on Mar 22, 2010 | Mercury Villager Cars & Trucks

1 Answer

How many o2 sensor are on a 2004 gmc yukon


Hi Charles,

GM products have 4 O2 sensors attached along the exhaust pipes coming off the manifold. Bank 1 is aligned to cylinder 1 on the engine which is the driver's side. Sensor 2 is the one after the convertor (Sensor 1 being the one before the convertor). Link attached for more information.

Oxygen Sensor Locations

I have changed out one of mine; quite easy, but you need a sensor wrench which you can find an any automotive store for around $15.

The part is available readily enough - link attached.

Good luck

Feb 07, 2015 | 2004 GMC Yukon

1 Answer

I have the P0133 code bank 1 sensor 1, i know it could be the O2 sensor but when i disconnect the service hose leading to the evap canister it runs better but only for a little bit. im not sure why that...


CODE PO133 O2 BANK 1 SENSOR 1 SLOW RESPONSE. POSSIBLE CAUSES, LOOK FOR EXHAUST LEAK IN THE EXHAUST MANIFOLD OR EXHAUST PIPES. THE O2 SIGNAL CIRCUIT OR UPSTREAM CIRCUIT HAS FAILED, THE O2 ELEMENT HAS FAILED.COULD BE THE O2 SENSOR ALSO YOU COULD HAVE A VACUUM LEAK OR EXHAUST MANIFOLD LEAK.

Apr 18, 2011 | Dodge Stratus Cars & Trucks

1 Answer

I have a 2000 Golf GTI VR6 and I am trying to find the fuse for the oxygen sensor, I was told the fault, Found code for O2 sensor heater Bank 1 sensor 1 open circuit. Front O2 sensor failed. Might be the...


if you dont get the o2 sensors replaced it will cause the car to overheat cause im having the same problem with my golf gti vr6 had it dionosed and both my o2 sensors are out nothing else is bad and now it overheats due to the o2 sensors

Aug 28, 2010 | Volkswagen GTI Cars & Trucks

1 Answer

2006 hundai elantra P2270 code. If this is an O2 sensor, which one?


Possible O2 sensors:

P2270 O2 Sensor Signal Stuck Lean Bank 1 Sensor 2
P2271 O2 Sensor Signal Stuck Rich Bank 1 Sensor 2
P2272 O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
P2273 O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2274 O2 Sensor Signal Stuck Lean Bank 1 Sensor 3
P2275 O2 Sensor Signal Stuck Rich Bank 1 Sensor 3
P2276 O2 Sensor Signal Stuck Lean Bank 2 Sensor 3
P2277 O2 Sensor Signal Stuck Rich Bank 2 Sensor 3
P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
---
This is Bank 1 (closer to the dash panel) Sensor 2 (located after the catalytic converter).

---
Note: A malfunctioning front oxygen sensor may cause fuel trim codes to set.
  1. Several Diagnostic Trouble Codes use specific terminology to refer to sensor location. The illustration and key below explain the following terms:
  2. Engine BANK Bank 1 is closer to the dash panel, (also referred to as RH or right hand). Bank 2 is closer to the radiator, (also referred to as LH or left hand).
  3. UP Refers to Sensor 1 or "front sensor". It is located closer to the exhaust manifold and before the catalytic converter.
  4. DOWN Refers to Sensor 2 or "rear sensor." It is located after the catalytic converter.
  5. The following examples show how to interpret oxygen sensor terminology:
  6. B1/S1 = Bank 1/Sensor 1 = Dash panel side, BEFORE the catalyst or "upstream"
  7. B2/S2 = Bank 2/Sensor 2 = Radiator side, AFTER the catalyst or "downstream"

Aug 06, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

Im trring to find the location of the o2 sensor it needs to be replaced but having trouble figuring out which one it is.


The upper O2 sensor is located on the exhaust manifold/s, and the rest is down the line. Some Vehicles have 2, 3, etc. The Upper O2 reads and helps control air/fuel mixture, the lowers usually monitor emissions, and Catalytic converter efficiency.

May 01, 2010 | 2001 Hyundai Sonata

1 Answer

How do i replace an o2 sensor in a 2005 chevy Colorado. I have the yellow engine light on solid. I was told that this is an indication that sensor #1 has to be replaced.. I wondered how to replace it and...


If you did not get an o2 sensor code or you didn`t get the codes read then I would not be replacing anything.The light is on for a reason and in order to find out why you have to get the codes read.Auto Zone or most parts stores will do this for free.Save your self some money and before you buy and replace the o2 sensor make sure that is the problem.There are 2 o2 sensors on this vehicle.Hope this helps.Good luck.

Mar 16, 2010 | 2005 Chevrolet Colorado

1 Answer

Where are the O2 sensors located? I hace a P0131


the o2 sensors are located on the exhaust pipe running from the motor to the muffler.the wires are made onto the sensor itself.

Jan 13, 2010 | 2005 Subaru Outback

1 Answer

Im getting a code 51 from the on borad computer on


Do you mean P0051??

If you do, then it's an issue with one of your O2 Sensors.

You may have a short in the heater circuit in the sensor
The O2 sensor heater has failed
The wires connecting the sensor are broken or frayed

Most likely you will need to replace the sensor.
The sensor is Bank 2 Sensor 1
Bank 2 means it is located opposite of where cylinder 1 is (not sure where cylinder 1 is on your car) and Sensor 1 will mean it's the sensor located before the catalytic converter

Sep 25, 2009 | 1994 Nissan Maxima

Not finding what you are looking for?
1992 Pontiac Grand Prix Logo

Related Topics:

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...