Question about 2004 Jeep Wrangler

1 Answer

Check engine light came on.

One month ago mechanic reset light and said there was a slight evap leak in the tank, possible o-ring.Might go away with warmer weather. Said tank needs to be dropped to fix problem. Sai it's no big problem. Light stayed off one month but is back. How do I reset it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

Go to your local discount store and pick up an OBD II auto trouble code reader it'll cost around $50.00 depending on where you go. Make sure you read the package and that it says the reader can "clear" trouble codes. Follow the readers directions but be sure to check your current code to make sure you haven't developed a new problem. Also, some auto part stores will read your trouble code and reset it for free, you'll just need to check around in your local area.

Posted on Feb 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced head gasket. now check engine light is on with a p0442 code. are there any evap hoses that I can inspect for cracks or damge since the gasket was replaced.


Tom, Yes, you should check all evap hoses for cracks and leaks.
Common Problems That Trigger the P0442 Code
  • Defective or damaged fuel cap
  • Distorted or damaged Fuel Tank Filler Neck
  • Small tear or puncture in the Evaporative system hose(s) and/or Carbon Canister
  • Defective Fuel Tank Sending Unit gasket or seal
  • Small split in a seam of the Carbon Canister
  • Defective Evaporative Vent Valve and/or Evaporative Purge Valve
  • Defective or damaged Fuel Tank
  • Defective Fuel Tank Pressure Sensor
  • Defective Leak Detection Pump
  • Slightly loose and/or worn clamps or hardened O-rings anywhere in the EVAP system Check the attached links,
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Engine Vacuum Leaks Tweet

https://books.google.ca/books?id=RLBuCgAAQBAJ&pg=PT523&lpg=PT523&dq=how+to+check+evap+hoses+for+cracks+and+leaks&source=bl&ots=tXENnJRaXU&sig=b78MxmS0N_fvBD0_lS0QzURuz2U&hl=en&sa=X&ved=0ahUKEwi4kpbz0LbLAhVju4MKHegzC18Q6AEITTAI#v=onepage&q=how%20to%20check%20evap%20hoses%20for%20cracks%20and%20leaks&f=false

How Diagnose Check Engine Light Code P0456 Small EVAP Emission Leak

Volvo S70 Evap Small Leak Common Problem P0442 Charcoal Canister Hose Fix

Mar 10, 2016 | 2000 Chevrolet Malibu

2 Answers

How to repair engine code po442 2009 mazda 5?


Check the purge solenoid under the hood common problem in mazda 5 6 cx7.

Jul 11, 2014 | Mazda Cars & Trucks

2 Answers

Obd code p0457 fuel cap replaced mil reset defect not cleared connection checked ok


The code is for a large leak in the EVAP system such as a loose or missing gas cap. But it could also mean a loose or missing hose to the canister or other leak in the tank.
The computer vents the tank several times an hour while the engine is running, and it checks the system by pressurizing the gas tank. If the tank will not hold pressure the code is set.
You may have to check the top of the tank where the fuel pump gasket is, as well as the vent lines to the front of the car.
A mechanic would perform a smoke test to look for leaks.

Jul 23, 2012 | Honda Accord Cars & Trucks

1 Answer

2004 hyndai Santa fe with code Po441


that is an evap emissions code. basically it is fuel tank isn't holding pressure. not a big deal at all your gas cap might have been loose or may be leaking replace your gas cap and drive it for a little while to reset your "drive cycle". if it doesn't go away on its own then have it diagnosed for possible fuel fill line cracks or tank leaks.

May 26, 2012 | Cars & Trucks

3 Answers

Code po440 for my 2003 pontiac aztek..what does that mean? Is it serious...car seems to be running just fine. it come on like 6 months ago and then went away till yesterday.


This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

Mar 15, 2011 | Pontiac Aztek Cars & Trucks

3 Answers

P0456 error code on a 2003 Mits. Galant


P0456 = "Evaporative emission (EVAP) control system leak detected (very small leak)."

Feb 25, 2011 | Mitsubishi Galant Cars & Trucks

2 Answers

Codigo p1440


EVAP System Vent Circuit Malfunction

This diagnosis detects leaks in the Evaporative Emission (EVAP) purge line using of vapor pressure in the fuel tank. The EVAP canister vent control valve is closed to shut the EVAP purge line. The vacuum cut valve bypass valve will then be opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP control system pressure sensor can now monitor the pressure inside the fuel tank. If pressure increases, the Engine Control Module (ECM) will check for leaks in the line between the vacuum cut valve and EVAP canister purge volume control solenoid valve.

Possible causes
- Incorrect fuel tank vacuum relief valve
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Leak is in line between intake manifold and EVAP canister purge volume control solenoid valve
- Foreign matter caught in EVAP canister vent control valve
- EVAP canister or fuel tank leaks
- EVAP purge line (pipe and rubber tube) leaks
- EVAP purge line rubber tube bent
- Blocked or bent rubber tube to EVAP control system pressure sensor
- Loose or disconnected rubber tube
- EVAP canister vent control valve and the circuit
- O-ring of EVAP canister vent control valve is missing or damaged
- EVAP canister is saturated with water
- EVAP control system pressure sensor
- Absolute pressure sensor

Possible solution
- Loose fuel filler cap
- Leaking fuel filler cap


Hope helps (remember to rate this answer).

Jan 05, 2011 | 2000 Hyundai Sonata

1 Answer

Gas smell outside and inside


don't over fill the tank, when it clicks off thats it!! any check engine light? I had fuel smell, and the O-Ring was leaking when I changed the fuel pump. Top of the fuel tank, was leaking only on a full tank, Also evap, pump and hoses do crack and leak but it will show, in a check engine light usually

May 12, 2009 | Dodge Caravan Cars & Trucks

3 Answers

Leak in evap system, where and what is an evap system. 2001 mitsubishi Galant


I have the same failure that occurred when smogging my Ford Ranger. The EVAP test was just added a couple of years ago and it tests for leaks in the gas tank vapor recovery system. What this is a system of vapor recovery lines that connect from the gas tank and goes to a canister then returns to the intake and on the next engine start and gets used, instead of leaking into the air.

The only issue is these lines can develop a leak at any of the connection points or along the rubber portions and can be a pain to replace depending on your application. So until you fix the leak you will fail this test since they pressurize the system and if there is a leak it won't hold the pressure.

May 05, 2009 | Mitsubishi Galant Cars & Trucks

Not finding what you are looking for?
2004 Jeep Wrangler Logo

Related Topics:

234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...