Question about 2007 Dodge Nitro R/T New Cars
Believe it or not, it doesn't have one. It just has a cap with no dipstick over the tranny fluid fill tube. You have to take it to the dealer, or a shop with the "speacial tool" (dipstick) to measure it. Some speculate that this may be due to the fact that Chrysler has had a bad rap for a number of years related to their transmissions. The don't want consumers adding the wrong type of tranny fluid (dextron) to the vehical thereby creating shifting and other issues. Rediculus if you ask me. Hope this helps. Please remember to rate my answer. Thanks.
Posted on Feb 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 26, 2016 | Dodge Nitro Cars & Trucks
Jul 30, 2014 | Cars & Trucks
Nov 06, 2012 | Cars & Trucks
Jan 21, 2012 | 2008 Dodge Nitro
Oct 13, 2011 | 1998 Chevrolet Prizm
Mar 15, 2011 | 1995 Chevrolet Cavalier
Drive the car for several miles or until the engine has reached its normal temperature, as indicated by the temperature gauge. Position the vehicle on a flat surface, shift the transmission to the "Park" position and apply the parking brake.Raise the hood and allow the vehicle to idle.
Withdraw the transmission's dipstick. The dipstick features a T-shaped handle with the words "Trans. Fluid" stamped into the top of the handle.Wipe the dipstick clean of any transmission fluid with a clean shop rag. As the vehicle is driven, transmission fluid may splash onto the dipstick, resulting in a false fluid level reading.Insert the dipstick into its tube until the handle rests securely against the top of the tube, then withdraw the dipstick and note the fluid level. The fluid level should be at or just below the "Warm Full" mark stamped into the dipstick. If the level is low, fluid must be added.Add Mercon V transmission fluid in small increments to avoid overfilling the transmission. Insert a funnel into the top of the dipstick tube, then pour the transmission fluid into the funnel, periodically checking the fluid level on the dipstick.
Jan 12, 2011 | 2002 Ford Taurus
Pull out the dipstick.
With the gearshift in Neutral or Park and the parking brake on, let your engine run. Be sure the engine is warm when you pull out the dipstick. (Don't turn off the engine.)
Check the fluid.
Dip the tip of your index finger into the fluid on the dipstick and rub the fluid between your finger and the tip of your thumb. The transmission fluid on the dipstick should be pinkish and almost clear. If it looks or smells burnt or has particles in it, have a mechanic drain and change the fluid.
Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.
If the transmission fluid is clear but doesn't reach the "Full" line on the dipstick, use a funnel to pour just enough transmission fluid down the dipstick tube to reach the line. Don't overfill!
Jan 03, 2011 | 2001 Saturn S-Series
Aug 04, 2010 | Jeep Cherokee Cars & Trucks
555 people viewed this question
Usually answered in minutes!