Question about 1993 Nissan Quest

1 Answer

Shift lever is loose and is not showing the correct gear position

My 1993 Nissan quest shift lever is loose and is not showing the correct gear position. I have installed new safety switch and adjusted shift indicator per manual repair book but the problem still exists. Somebody told me that there is a shift bracket on the steering column that becomes loose and cause the problem.

Posted by on

  • Anonymous Feb 24, 2009

    THE GEAR SHIFT IS LOOSE.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 4,369 Answers

The hex head bolt is loose or fell out on your carpet driver side flor

go hear to see picture of where bolt is

http://autos.groups.yahoo.com/group/villagerquest/

Posted on Mar 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why cant i get any gears when i shift the shift lever


Check the shift linkage an transmission

Nov 17, 2015 | 1995 Nissan Quest

1 Answer

2000 Nissan Quest slow shift to third gear (automatic). What would you suggest


Why are you shifting?Use drive,reverse and park,changing gears makes it get slow in time,wearing your transmission out.

Feb 02, 2014 | 2000 Nissan Quest

1 Answer

2000 nissan quest won't shift to reverse


first have you checked the fluid level? are there any codes? does the transmission shift good in other gears?

Oct 31, 2012 | 2000 Nissan Quest

1 Answer

Gear shift lever in column is loose


your problem with the gear selector is in the item 25 these are 2 plastic bushings that wear out and cause the gear selector feels loose, you should also check the item 27 this item has one or two screws loose and cause the gear selector feels loose

ganyapr_8.gif

Item Part Number Description 10 3F609 Tilt Wheel Handle and Shank 11 7361 Column Shift Selector Lever Plunger 12 7210 Gearshift Lever 13 3D657 Steering Column Shaft 14 7B071 Transmission Control Selector Lever Plunger Spring 15 7G357 Gearshift Lever Pin 16 7212 Shift Tube 17 N806582 Tilt Column Pivot Screw 18 7C464 Transmission Control Selector Lever Spring Clip 19 7E400 Gearshift Tube Bushing Clamp 20 - Spacer (Fixed Column) 21 3E729 Steering Shaft (Fixed Column) 22 3F527 Lever Assembly (Manual Transmission) 23 3F530 Pin (Manual Transmission) 24 3F752 Brake Shift Interlock Solenoid 25 7335 Gearshift Lever Socket Bushing 26 7A216 Transmission Shift Selector Position Insert 27 7302 Transmission Selector Lever Arm and Support 28 7E395 Shift Cable and Bracket 29 7210 Gearshift Lever 30 3E691 Steering Column Lock Pawl

Feb 13, 2011 | 1998 Ford Econoline

1 Answer

Automatic shift lever won't shift the truck into gear we can shift it manually underneath the truck into gear but the lever isn't shifting the linkage


the linkage has slipped and is not in the notch on the shift lever so slide he shift lever into place then tighten the bolt down so it will hold the shifter on the trasnmisson, this is caused by a loose nut on the shifter nut.

Jul 04, 2010 | 1993 Ford Ranger SuperCab

1 Answer

Shift lever on 93 nissan quest is loose and will not get out of park


you have loose torx bolts on steering column shifter. In fact, the bolt may be on the floor.

go here and see pictures in photo file - loose shifter.

http://groups.yahoo.com/group/villagerquest/

please rate

May 21, 2010 | 1993 Nissan Quest

1 Answer

Transmission will not go into reverse. Sometimes it will and sometimes it will not. Drives well drive and reverse once in gear.


It sounds like the shift lever is out of adjustment by a small amount. Try moving the shift lever a little bit forward & backward from it's normal position to see if this is the case.

Mar 24, 2010 | 1993 Nissan Maxima

1 Answer

04 Nissan quest will not go into park. It will


Gear linkage either needs adjustment or has a broken part

Jan 27, 2010 | 2004 Nissan Quest

1 Answer

The shift lever on the column will not change gears, its in the top placement (what would be park)but wobbles in place,and will not start when you turn the key.


Under the dash above the pedals look to see if the linkage has come loose. you will need to get a good light and turn upside down and squeeze up in there, once positioned haved some one move the shifter and you will see if it has come loose. I had lost one screw in mine and thought I lost the entire transmission, couldnt get it in any gear, now its still a bit loose but replaced the screw and was able to shift again.

Aug 13, 2008 | 1995 Nissan Quest

2 Answers

Gear box Malfunction in the 2004 Nissan Quest... when in park, goes in reverse and in reverse, goes forward... what can this be?... Richard, Farmington, Michigan


Sounds like your shift cable has gotten out of sync, If this is the case, you take the shify cable loose from the link on transmission, then shift link to park position , then adjust cable to line up to the link and rehook. I don't know exactly how your set up looks but the procedure is the same on most cars.

Aug 11, 2008 | 2002 Nissan Quest

Not finding what you are looking for?
1993 Nissan Quest Logo

Related Topics:

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...