Question about 1994 Chevrolet Camaro

2 Answers

No heat in my 95 camaro v6 3.4L their is no heat coming out i can fix it but don't know where it is i have no manual just bought so if you can help that would be great if not do you know how much it would be by a mecanic no heat. heater core works just no heat.

Posted by on

  • 2 more comments 
  • keith197431 Feb 22, 2009

    no heat but it blows great. thermostat has been replaced. I think it's in the wiring because there are alot of wires under the dash that have been cut and left hanging.

  • keith197431 Feb 23, 2009

    the door you are talking about where would i look

  • keith197431 Feb 23, 2009

    its a 1994 camaro Z-28 with a lt1 not a 95 v-6. signed keith197431

  • Chris Kieninger
    Chris Kieninger May 11, 2010

    no heat, or just no air blowing out of the vents?



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 103 Answers

It sounds like the door to divert the air over the heater core isnt moving... Michigan man is right,librarys are a great resource of tech info

Posted on Feb 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

If it was me i would go to the nearest library and there you can get pictures and diagram showing you how to repair your car and here is a place that sells only GM parts Schram auto & truck parts the number is 1-800-292-1032 just in case you have a problem finding one.

Posted on Feb 23, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will a 96 4L60E transmission interchange with a 94 4L60E

All 4L60E /4L60/700R4 have the same gear ratio which can not be modified. ..swap the 94 internal harness into 95 and 96 transmission

May 08, 2016 | Cars & Trucks

1 Answer

I just changed the spark plugs & wires on my 95

Oil change 5W/30 and Wynn's thin oil in crankcase . One bottle injector cleaner .to Gas tank .

Jan 23, 2013 | Cars & Trucks

1 Answer

I bought a 95 Camaro z28 with a lt1 v8 and I just changed alot of sensors and the water pump, pcv, thermostat, gauge sensor ,all the cooling hoses ,spark plugs and wires ,new opti-connector,fans are...

Did you burp the air out of the cooling system? That needs to be done if you haven't - air will trap the thermostat and keep it from opening. Check my tips and tricks for how to do this.

Jul 15, 2011 | 1995 Chevrolet Camaro

1 Answer

95 camaro, factory alarm wont let me start the car what

U will need to bypass the factory VATS (vehicle anti-theft system) system, it is very simple and all you need to know is at the web page link below.

Jul 20, 2010 | 1995 Chevrolet Camaro

1 Answer

I replaced my water pump and thermostat and the tempature gage censor but my 95 camaro over heats when it idles but not when i drive it

Check to see if you have an electric fan on your radiator or a fan that is mounted to the engine and turns off the the pulley system. If you have an electric fan, when the car heats up at idle, turn you AC on and see if the electric fan comes on. If it does then you have a sensor bad. You have 2 sensors one tells the guage what to register and the other one tells the electric fan when to come on. If you have a fan mounted to the engine then the clutch part of the fan is probably bad. Yopu can buy this seperate and don't have to buy the whole assembly. Most of the v-8's have fans mounted to the motor and most of the v-6's have electric fans but I have seen some with electric fans only. Please let me know if this helped, I am curious to hear the outcome.

Feb 09, 2010 | 1996 Chevrolet Camaro

2 Answers

Heater is blowing but no heat

First check for low Anti-freeze, then you can squeeze the in-let line prior to the thermostat. It should be hard,when engine is cold. It is good to do this with the radiator cap off since you can watch for water movement while preforming this task, but if it is allowing the water to go through the thermostat; then it is staying wide open. It then will need to be replaced. Your heat should come back at that point.

Jan 06, 2010 | 1996 Chevrolet Camaro

1 Answer

Oil Pump Drive over

you need to order a tech manual / service manual go online to gm's or chevy website i have a Service manual for 95-97 so i may be able to help ya get spec's on it and i may be able to copy send via email

May 12, 2009 | 1995 Chevrolet Camaro

4 Answers

Rebuild manual

check ebay for a genuine GM service manual.

this should work, ask the seller to make sure it covers transmission rebuild. (it should)

Feb 21, 2009 | 1995 Chevrolet Camaro

2 Answers

No heat

Dear pcolaboy19,

If the heater fan is working just not blowing hot air it's probably the thermostat which you can buy at any auto parts store.

I like Advanced Auto Parts because they will usually point out to you where the thermostat is (it's not that hard to fix) and they'll usually test it for you when you get it out to make sure that it's not working in which case you will get cold air blowing but no heat!

The part should be around $20.

A Mechanic should only charge around $100 but may try to sell you other repairs to help keep their shop running profitably!

Hope This Helps!

Feb 07, 2009 | 1995 Chevrolet Camaro

1 Answer

95 camaro no spark on cylinder 6

Loud popping in the intake means that the unburnt gas exploding in intake.... Check cranks sensor and gear. Gear may dirty or even damage or BAD crank sensor the sensor provides reference for spark signal. So this may be your problem. Contact if you need more help. Thanks for using FIX YA

Jan 23, 2009 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1994 Chevrolet Camaro Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides