Question about 1989 Toyota Camry

1 Answer

Head lights on stop light off stop lights work when head lights or off

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Bulbs are blown on its a two stage light on your tail light bulb pull them and look to see if one side is bad

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beam headlights stuck on replaced switch same problem


It can be issue with headlight switch,but as its already been replaced.Try disconnecting high beam headlight wiring from headlight assembly and reconnect direct external wire from headlight switch to headlight assembly,then by switch see if headlight is getting off and turning on or not.
See below related help links,similar to your issue.Click the link below:----
Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

----------------
Only high beams working on GMC Savana?---------- High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ----------

Both headlight bulbs blow together?
----------

Car headlight bulbs don't last long?

------------ Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------
these will help.
Thanks.

Nov 06, 2012 | 2007 Chevrolet Tahoe

1 Answer

How to tell if dimmer switch is out


Sounds like the multi-function switch is faulty.

Oct 25, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

The signal was working fine as I changed lanes on


Probably it is the signal flasher located in the main fuse panel on most cars. It is a round,silvered coloured and usually has three prongs plugged into the panel

Jul 25, 2010 | 2000 Toyota Sienna

1 Answer

My repair light turned on and my day lights keep beeping


Well you know the problem, go for it, replace the head light.
In the future, this is how it works.
Pull the E brake up before you start the car.
When you put it down the geen day time light will flash three times then the repair light will come on.
That means you have a burned out head light.

Dec 29, 2009 | 2001 Chevrolet Cavalier

1 Answer

Tail Light and License Plate lights stopped working


With light switch on, test the wires leading up to the mentioned lights with a test light(cost about 5 or 6 bucks at wal-mart) that way u can eliminate any corrosion questions and get to the source quicker, if test light indicates that the wire is hot, than check connection areas for any wear and tear and possible carbon corrosion. Check lightbulbs, my license plate light stopped working and wire was hot, but wouldnt turn on due to the housing base, got too dryrotted and wouldnt function propery, had to rig it up, but works now.

Jun 08, 2009 | 2001 Dodge Ram 1500 Truck 2WD

4 Answers

Dash and tail lights on a '91 Lincoln Town Car - quit working


From what you just said i dont belive the mechanic checked your fuses correctly.

Check your self to confirm, But if no avial i belive the controller for your lighting may be fried.

Feb 25, 2009 | 1991 Lincoln Town Car

1 Answer

I have no head light on my Honda Accord DX no prower in the fuse


Do you have power at the headlight bulb connection?If you do then it leaves only two choices bad contact between the bulb and head light lense(poor earth)or blown bulb.If you have no power you will have to back track to where the power has stopped flowing.Could be a relay,pull headlight relay out and put back in as a poor contact can sometimes stop head lights working.Let me know how you go and wether you need any other advice with tracing the fault

Nov 12, 2008 | 1987 Honda Accord

1 Answer

1990 Jeep Wrangler Problem:


1990 Jeep Wrangler. Driving with lights on for 10 - 15 minutes. First the dash lights go out followed by the headlight and tail lights. If you pull the dimmer switch back (like you would to flash your brights at someone) the head lights will come on and as long as you continue to pull back on the dimmer switch the head lights will stay on bright.

Sep 30, 2008 | 1990 Jeep Wrangler

Not finding what you are looking for?
1989 Toyota Camry Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...