Question about 2002 Dodge Dakota Club Cab

1 Answer

I have a 2002 Dodge Dakota, the heater fan does not work in high

The fan works fine at the other speeds, but nothing on high. I am assuming it is the high speed fan resistor, but cannot locate it.
Any suggestions??

Posted by on

  • Anonymous Feb 23, 2009

    works on everthing but high



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

That would be my guess as well.

To get at the blower motor resistor is located in the passenger side footwell area and is mounted with two hex screws. near the blower motor itself

Sometimes it is easier to remove the glove box which is done by opening it and squeezing the sides together to release the tabs on it and letting it open farther than usual.

Posted on Feb 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the heater resistor on a 2005 dodge dakota? Behind glove box?

should be just above the blower motor. You will need to remove the glove box door to gain access.

Dec 12, 2015 | 2005 Dodge Dakota Club

1 Answer

The heater fan only works on two middle spots not on high or loww 2002 quadcab dakota

most likely it is the blower motor resistor. possibly its the switch but 9 time out of 10 its the resistor.

Jan 06, 2010 | 2002 Dodge Dakota Club Cab

1 Answer

The heater in my 2002 Dakota works only at the very highest setting. There is no power at the lowers settings. The defrost light doesn't come on until that setting also, so definantly no power. When turned...

I'm assuming you mean the fan only works on high. If that's the case the blower motor resistor is bad. When the fan switch is on high it puts a full 12Volts to the blower motor. When you have the switch in any other possition, the voltage is routed through the resistor and reduced thus making the motor run slower.

Dec 14, 2009 | Dodge Dakota Cars & Trucks

2 Answers

Heater fan only works on the two low settings.

if you have checked the switch as recommended, it is most likely to be the heater resistor which contols the diffrerent speeds. it is
normally fited near to the motor and is a squarish block with multiplug on it and coils like springs in the centre of it, look at the coils they may be burnt out.hope this helps

Apr 22, 2009 | 2001 Dodge Dakota

3 Answers

I have a 1998 Dodge 1500 why does the heater/ac blower motor only work on high, do I need to replace the motor?

The motor is fine, the blower resistor is the most likely cause. All fan speeds except high go through the resistor.

Dec 08, 2008 | Dodge Pickup Cars & Trucks

2 Answers

Blower fan works on high speed only, resistor problem, where do i find it?

You should find this on the or near the heater fan housing! Frankster016

Aug 22, 2008 | 2002 Dodge Dakota Club Cab

Not finding what you are looking for?
2002 Dodge Dakota Club Cab Logo

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides