Question about 1988 Chevrolet Cavalier Z24

1 Answer

No spark on # 5 cylender 1989 cavalier z24

I have a 1989 cavalier z24 with a 2.8L v6 im not getting spark on my #5 cylender i just changed the coil pack and wires and spark plugs and i am still getting no spark on that cylender

Posted by on

  • 2 more comments 
  • Dano2017 Feb 25, 2009

    1989 cavalier z24 no spark to one plug, changed plugs, wires, and one coil pack still no fire.

  • amyvil Feb 26, 2009

    i changed my crank shaft sencor and my car now runs like new it is a fairly cheep part and is located on the back of the block frome the underside if that doesent solve your problem it may be your coilpack modual whitch can get quite expencive (around the $150 mark ) so i would try the crank shaft sencor first to find it clime under your car so you can see the back of the block there will be a wire coming from the pasenger side of the engine that plugs into what lookes almost like a temp sencor. thats it . one little nut holds it in change it out and give it a try and have fun

  • Dano2017 Apr 14, 2009

    1989 cavalier had no spark to one plug now won't start at all no spark at all ignition module?

  • krisz24 Apr 25, 2009

    My 1989 Z24 2.8 has number 3 cylinder at the back not firing all the time and I pulled the plug and it's wet with gas. Weak spark and under load it cuts in and out as I let off the gas. Changed the coil pack platinum plugs and the wires! Still a problem.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Change the control modul. that control voltage to the coils. it sound like it not bleeding off fast enough the control modul is under the coils. befoe changing any part remove ground off battery. befor change any coils u could of swop to see if this is still not firing

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I instal a coil pack in a chevy cavalier 3.1 multiport fi v6 1993


Ok so follow the plug wires from spark plug to the other end that is the coil that it plugs into one end is spark plug the other is coil if the car run good before replacing wires and plugs more than likely you crossed a wire and nothing wrong with the coil and if i remember right its a 3 pack coil meaning there is 3 coils wich one would be bad is beyond me you can get a coil tester to find out but they are pricey or maybe take them off and some parts stores can test them

Sep 28, 2014 | 1993 Chevrolet Cavalier

1 Answer

1998 toyota 4runner #2 cylender misfire


You might want to look for a vacuum leak on the intake manifold. You also might need to hook up a scope and measure injector duty cycle and compare it with a good cylinder. Also check wiring for chaffing going to the injectors and coil pack. I can provide you with pin out on ECM if you need.

Oct 21, 2012 | 1998 Toyota 4Runner

1 Answer

Geting no spark to cylenders 5 & 6


Hi there:
  • Check the spark plug wires and the coil wire, ensure that the spark plug wires are securely attached to the spark plugs and the distributor cap.

  • Check the wire routing in order to ensure that cross-firing is not occurring. If the misfire occurs when the weather is damp, the problem could be due to worn plug wires.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 23, 2012 | 1992 Oldsmobile Cutlass Ciera

1 Answer

I have a 1989 dodge dakota sport and im not getting any spark at the plugs ive changed the coil, distributor cap,rotor button and still no spark and changed the stater any help?


check your fuses or your timing is off if your timing is off get your timing light if that dont work and is the motor even cranking over

Jan 09, 2011 | 1989 Dodge Dakota 2WD

1 Answer

Its a 1989 Chevrolet Cavalier Z24 V6. Wont start. Replaced the fuel pump, filter and strainer and its getting fuel now but still wont start. help!!!!


check for spark, at the spark plug wires. pull one off , get a helper, put a screwdriver in the sparkplug boot and hold it about 1/4 inch away from something metal on the car engine, have a friend start the car while you look for a small lighting bolt to jump from the screwdriver to the cars metal part. if you dont see spark you got bad parts somewhere. HOLD THE RUBBER ON THE SCRWDRIVER so u dont get a zap

Jul 31, 2010 | 1989 Chevrolet Cavalier

1 Answer

1989 v6 camry engine missfire


no your problem is definately the dizzie cap, as i found out to my cost on a lansia beta. any kind of crack in ur dizzie will cause probs. best way to find out is park your car in the dark open bonnet with engine running then get a mist spray with water in it spray at dizzie and you will see a slight yellow arc around the crack! any crack in bakelite distributors leads to loss of one or more banks

Jun 11, 2010 | 1989 Toyota 4Runner

1 Answer

Im changing the wires on my f150 4.2L v6 2wd. now im not sure what order my wires went. i tried to do it one at a time. but i did sumthin wrong, cause when i got to the last wires i needed a small wire and...


The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

found this online hope it helps

Nov 07, 2009 | 1999 Ford F150 Regular Cab

1 Answer

What is the easest way to get to and change a coil pack on a 05 ford escape


Depending on which motor you have will determine how to change the pack. I am not familiar with the 4 cylender motors but I assume that they are in the open. If you have the V6 then you are in for a little work. There are 3 packs in the front of the motor that are easly accessable. You will see them right on top. The other 3 are hidden under the intake manafold. If you are certian that it is a pack from under the manafold, Cylenders 4,5, or 6. Then do a search on how to change the spark plugs and you will find a very good page on how to get that manafold off. You will need new upper gaskets after removing the manafold. The new pack, and you may want to throw a new set of spark plugs in while you are there. If you have close to 100k miles on it then I would recomend that you change them while the intake is off.

Jul 10, 2009 | 2005 Ford Escape

1 Answer

Spark plug locations


If the car is missfireing, don't try to patch it one plug at a time. go ahead and replace them all at once. It will save you 5 more cylenders to hunt later.

May 21, 2009 | 2002 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...