Question about Volvo 850

1 Answer

My brake lights dont work on my 1993 chevy truck

But i have all other lights but flashers

Posted by on

  • Anonymous Apr 25, 2009

    Got blinkers, hazards, and tail lights, replaced brake swithch under dash....still no brake lights.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

If taillights work but, no brake lights,
there is a little switch on the brake pedal, up under the dash. it's a cheap part at the parts store.
the flasher breaker/relay is a round part that plugs into the fuse panel. easy change

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers dont work


Do the brake lights work? If the brake lights work then you probably need a new turn signal flasher,if not then check that all the bulbs are good,front and rear and check for a blown fuse...

Apr 07, 2011 | 1993 Oldsmobile Cutlass Supreme

1 Answer

1993 chevy cavalier - turn signals don't work, but four-way flashers do. EHHH?


Ther are seperate flasher modules for signal lights & 4 way flashers. Put the 4ways on & listen.Locate this module & the other is in the same area close by. Change it. Good luck!

Apr 09, 2010 | 1993 Chevrolet Cavalier

2 Answers

I have 1995 chevy 3500 truck my flashers and my brake lights wont work, turn lights do work and running lights work


Flasher module (under dash by left leg); possible fuse in panel driver side dash by door; possible relay in power center under hood on driver side by brake booster.

Feb 13, 2010 | 1995 Chevrolet C1500

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

My brake, hazard and turn lights dont work, i


well u have two seprate problems the hazards and turn signals have a flasher that needs replacing if the fuse is good on the fuse box marked signals .and there is a brake light switch under the dash board near the brake pedal it has two wires on it check the wires make sure they are connected if so replace the brake light switch

Nov 13, 2009 | 2002 Chevrolet Astro

2 Answers

My 2005 Chevy Avalanche has no brake lights


See if the turn signals work,and the flashers,the problem,is most likely in one of the flashers,they are stuck,the flasher.

Nov 11, 2009 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Brake lights and turn signals stopped at same time... the 4 ways don't flash either


well i just fix a 2002 vette with no turn signals and no 4 ways,,it was the four way flasher was bad and thats part of the 4 way switch,,,but the brake lights work,,i think you might have a bad IPC,instrument panel cluster,,that controls everything,,the 4 ways flasher only control 4 ways and turn signals,,,so i dont think you prob is the flasher i think its internal to the IPC,,i rec take to chevy dealer get it checked

Oct 13, 2009 | 2001 Chevrolet Corvette

2 Answers

Turn signal flasher


There are 6 relays on the driver side under the dash. None are labeled turn lights.

Feb 01, 2009 | 1993 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...