Question about 1998 Chevrolet Blazer

1 Answer

Stalling 1998 blazer stalls when idolling or when stopped and gas to go seams rpm might be low around 700 but drops to 500 only owned this for 2 months with no problems until now and does not always do it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

It sounds like all it needs is a good tune-up. I would check the spark plugs, spark plug wires, air filter and fuel filter.

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why it stalls at stops and low speeds


accord stalling on every stop. (1/2) - EricTheCarGuy ...

www.ericthecarguy.com/.../8.../46884-accord-stalling-on-every-stop
The car runs good but stalls every time i come to a stop. ... a stop then it diesagain.only on the stops does the idle drop very low to the point of stalling.what ... only when I start slowing down and come to a complete stop RPM's go down and the cardies. ... The popular Honda Civic and Accord vehicles share many powertrain ...

1998 Honda Accord loses rpm/ stalls coming to a stop ...

honda-tech.com/honda-accord.../1998-honda-accord-loses-rpm-stalls-co...
Jan 10, 2013 - I just bought a 1998 4 cyl 2.3 L Honda Accord two days ago. ... 1998Honda Accord loses rpm/ stalls coming to a stop. .... Is clockwise high idle or low idle? all in all i probable rotated counterclockwide 1.5 or 2 turns. maybe this ...

1999 Accord, 130k+, stalls when slowing to a stop - Honda Accord ...

www.hondaaccordforum.com > ... > General > General Tech Help
Mar 10, 2010 - My fiancee's '99 Accord EX Coupe 4-cylinder automatic, with 130,000+ miles, has recently (in .... No low RPM & feeling like it's GOING TO stall.

99 Honda Accord - Strange Stalling Issues! HELP!

https://www.2carpros.com/.../1999-honda-accord-99-strange-stalling-issu...
My 1999 Honda Accord is having sporadic stalling problems. I've noticed a pattern. Itstalls while going slow speeds and stop and go traffic, etc. The engine just ...

Stalling or Low Engine Idle Speed Due to Dirty ... - Repair


Jan 02, 2016 | 1999 Honda Accord

1 Answer

Low idle & vibration at idle


I don't know if this will help. Had a similar problem with a 99 Blazer.
Would drop to between 300 and 500 rpm at stop signs and red lights, would stall and shake.
Did all the same checks, replaced mass air flow sensor, replaced cam sensor, cleaned the fuel injectors but the problem was still there.
Replaced both #1 and #2 O2 sensors in the exhaust pipes and now the vehicle runs fine. The idle is back to a steady 750 rpm in all stopping conditions. The Mass air flow sensor and Cam position sensor get information from the O2 sensors.

Apr 10, 2014 | Ford Transit Connect Cars & Trucks

2 Answers

2000 dodge stratus 2.4l dohc stalls at stops starts up with very light touch of gas pedal may or may not stall again for a coule stops but will again rpms go from around 800 at idle to 500 then 200 th


If it's fuel-injected, you may need to have the injectors cleaned, and also, any air filters should be changed at the same time along with gas filter/s. If it's carbureted, the same as above, but have someone clean the carburetor completely. Make sure all air hoses are attached correctly, securely and NOT broken. If broken, replace them.

Sep 19, 2012 | 2000 Dodge Stratus

1 Answer

My 2005 chevy cobalt rpm drops very low when coming to a stop. I changed the Oil and Plugs and it helped a little bit. PLEASE HELP


first check the throttle plate for carbon build up the look for the knock sensor harness rubbing onto the fan shroud

Jun 08, 2012 | 2005 Chevrolet Cobalt

2 Answers

93 Honda accord - idle real low (500 rpm) HELP, please!!


near the throttle body there is an adjusting screw(flat head) for air fuel mixture, it's on a deep cavity sometimes with a cover, adjust counterclockwise will increase the idle.

May 07, 2009 | GMC Canyon Cars & Trucks

1 Answer

Car idles low, stalls after start


Common issue at the shop (i'm a ford technician), here is what I do to correct it.
Here is the most common cause of surges and stalls at stops and low erratic idle speed and rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Mar 11, 2009 | 1999 Mercury Cougar

1 Answer

'92 Mitsubishi Diamante - Stalls sometimes when come to a stop


find the Idle air control valve on the side of the intake and then take off and clean or replace you could try taking a small ball peen hammer and tapping it lightly while it is idling let will genarly free them up

Mar 04, 2009 | 1992 Mitsubishi Diamante

1 Answer

Engine stalls


my friend had one that did the same and he replaced throttle positioning sensor and it fixed it. but when you put a new battery in them they wont idle until you hold at steady low rpm for almost a minute because it has to relearn its position. so check your voltage meter and make sure it is around 13-14 volts when running and not on 12 while running because it could be too low of voltage for it and would be the same principle as disconnecting the battery because it takes 12 volts to keep computer on. hope I wasnt too confusing but I just want you to check your voltage for free before you buy electrical parts.

Dec 22, 2008 | 2005 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...