Question about 2002 Suzuki Grand Vitara

1 Answer

Headlight alignment got a suzuki gv 2000 need to adjust the headlights but dont know the height can you help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change the front driver side light bulb in a 03 Suzuki Grand Vitara 1.6?


Danielle, On the driver side you may have stuff in the way, which may have to be removed, to change bulb. Sometimes it is easier to remove headlight then change bulb and reassemble. Videos attached make it look fairly easy to change he bulb with out removal of headlight.
Check the attached links,instruction and guides, Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Suzuki Grand Vitara Headlight Bulb Replacement
Headlight Change 1999 2005 Suzuki Grand Vitara 2003 Suzuki Grand Vitara 2...
Auto Repair Maintenance How to Replace Headlight Bulbs
How to replace Suzuki Grand Vitara Tail Light Bulb


Jul 03, 2016 | 2003 Suzuki Grand Vitara

2 Answers

How do you adjust the headlights on a 2001 Ford F150?


small hex socket just under hood over top each headlight right turn down left turn up

Oct 14, 2014 | Ford F-150 Cars & Trucks

2 Answers

How do u adjust headlghts on 1991 gmc seirre


adjustment is on the top of the light and the side.

Jun 22, 2014 | 2003 GMC Sonoma Extended Cab

1 Answer

Headlights adjustment


Open the hood and look for adjusting screws right behind the headlights. Park the car on a level surface facing a wall or garage door so you can see the height of the beams of light. Adjust them up or down, or left or right and make sure they are both the same height. Drive the car at night to check your adustment, then change it if you need to.

Jul 18, 2012 | 1997 Mazda Protege

1 Answer

Adjusting bi-xenon headlights on Volvo S40


This guys don't know what they are talking about. If you have self leveling head lights and they are way out of alignment, yes there is adjustment screws but those mess with a different light bulb (daytime running light) instead of the main bulb alignment.

So what is a man to do? go to the dealer and have them adjust them for you. Believe it or not everytime you get an aliment done you have to recalibrate your headlights because they change the way the vehicle sits. Do it enough times and the headlight will go out of wack (because of the self leveling function)


In other words, they headlights are adjusted by means of a Computer. You could do it your self but you have to buy the DICE VIDA adjustment tool and the proper software from Volvo. Not cheap, just go to the dealership.

Jul 05, 2012 | Volvo S40 Cars & Trucks

1 Answer

Need to adjust the headlights on a 95 p/u


There is an adjustment screw on headlight housing which will adjust the vertical height of your lights. Best way to adjust, on a flat fairly long stretch at night, adjust lights then to ensure thats where you want them and they are aligned equally (impossible to do during daylight hours)

Dec 10, 2010 | 1995 Chevrolet Suburban

1 Answer

I need to replace and then adjust the headlights on my 2000 Chrysler 300M. How do I replace the headlights, then adjust them.


Park your vehicle on level ground with the headlights near a garage door or wall. A good distance is 2-3 feet away from the wall or door. The location must be perfectly level and flat at a distance of 10 to 25 feet away from the door or wall.
Switch on the low headlight beams and mark the horizontal and vertical centerlines of each headlight beams on the wall using masking tape. This will mark the center of each beam with a +. The marking will tell you where exactly the headlight beams should be centered from a distance.

Move the vehicle back about 10 to 25 feet away from the garage door or the wall.

Keep the headlights on the low beam setting.
Use the markings you made on the wall or garage door to, check where the light shines and see if the centerlines still match up with the masking tape marks. If the centerlines of the two beams do not align with the tape marks, you can adjust one or both sides as needed.

Make the necessary adjustments with the lights still on while watching the light beams on the wall and your marks.
Turning the top adjusting screws in a clockwise direction will raise the beam while counterclockwise turn will lower it.

Turning the side adjuster screws will adjust the lights to the left or right.

Continue the adjustments until the center of the light beams are aligned with the tape marks. Then adjust the vertical alignment of both beams slightly below the marks on the wall. This will assure that the lights are tilted slightly downward so they won’t blind approaching motorist.

The will align bot lights, the high and low sine both are connected to the same headlight!!

Nov 18, 2009 | 2000 Chrysler 300M

5 Answers

How do i adjust my headlingt on a 2001 suzuki xl7


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Nov 14, 2009 | 2001 Suzuki Xl 7

1 Answer

Headlights light up about eight feet of pavement and no more.


There are height adjustment knobs on the back of the lamp housings you can use to adjust the height and aim of the lamps.

Due to the age of your vehicle, it is likely that they will break when you try to move them. This is very a common occurrence on S/V40 headlights; the lamps will need to be replaced if the adjusters break off, so be gentle.

May 11, 2009 | 2000 Volvo S40

1 Answer

Headlight adjustment 1999 S70


on each headlamp assembly, there will be either one or two plastic nuts that you can turn.

If you only have one nut on each, that will adjust the vertical aim of the headlights.

If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Aug 18, 2008 | 1999 Volvo S70

Not finding what you are looking for?
2002 Suzuki Grand Vitara Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...