Question about 2002 Hyundai Accent
2002 Hyundai accent
Light will flash when accellerating,if this is the case ,it s misfirering, car must stumble,check scan code,spark plug wires coil pack,
Posted on Feb 22, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i just replaced the timing belt, and asked the garage to look at the transmission for me because i thought i was experiencing some subtle shifting problems. they told me the transmission looked fine, but i needed a new filter and fluid. the engine light didnt turn on til a couple weeks later tho. does this sound like a new filter and fluid would fix this problem?
Posted on Sep 09, 2008
SOURCE: 2002 Hyundai Accent Problem
first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
Posted on Sep 28, 2008
Was It Starting Before?
Who Changed It?
If The Belt Broke And The Belt Was Just Put Back On Without It Being Put In (TDC) Top Dead Center The Car Will Not Run. Warning! Trying To Start It Over And Over Will Destroy The Engine.The Engine Works By Being (TDC) Top Dead Center The Timing Controls When The Cylinders Come To The Top. The cylinders Are Controlled By The Timing So When The Spark Plugs Try To Ignite. The Cylinders Are Not In Position And Thus Will Not Create Combustion For The Engine To Run.
Posted on Jan 23, 2009
P0734 - 4th gear incorrect ratio. P1529 Malfunction Indicator Lamp Request. Problem is in the transmission.
Take/Tow your vehicle to an authorized Hyundai dealership and pay the diagnostic fee... they will tell you exactly what the problem is and the cost of parts/labor to fix it... at least this way you'll know what the problem is and what's required to fix it.
Posted on Oct 03, 2009
You have a vacuum leak. This means that you will need to go through all of the vacuum likes and make sure they are connected and not broken. If they are broken buy new vacuum line, its like less and $1 per foot. In your case if you can I would replace all of the vacuum lines if they look cracked and old.
Posted on Nov 18, 2010
Tips for a great answer:
Nov 04, 2013 | 2006 Hyundai Accent
Apr 29, 2013 | 2002 Hyundai Accent
Apr 18, 2012 | 2002 Hyundai Accent
Apr 17, 2012 | 2002 Hyundai Accent
Mar 27, 2010 | 2002 Hyundai Accent
Oct 30, 2009 | 2002 Hyundai Accent
Oct 23, 2009 | 2002 Hyundai Accent
May 31, 2009 | 2000 Hyundai Accent
956 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: