Question about 2002 Chevrolet Suburban 2500

1 Answer

1997 Suburban and horn not working

If I keep the fuse in the horn will not stop honking but when I press the horn on the steering wheel, it does not honk. Tried a new horn and still not working.

Posted by on

  • Anonymous Mar 25, 2014

    keeps beeping sporadically



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Behind the airbag is the horn switch i dont reccomend checking the the switch unless you know how to disarm the srs systems but i accidently leaned on it once pushed the plate in and when i pushed on it it went off but if i took my hand off it it would go back on otherwise their could just be a simple short

Posted on Feb 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My horn on my 2008 Mazda 3 honks for no reason.

Could be the clock spring cable in the steering wheel.

Aug 20, 2017 | Mazda Cars & Trucks

2 Answers

My horn stop working and when I lock the doors with remote key it wont sound when you lock the doors Forgot to add that it is a 2012 Ford Escape Horn does not work from the inside either. Is it a fuse

Does the horn sound when you press it on the steering wheel if not check for a blown fuse to horn and then if ok see if you have power to horn and then if that is ok run a wire from the battery to the horn and see if it honks.

Apr 15, 2017 | Cars & Trucks

1 Answer

The horn in my 1999 dodge stratus keeps honking

the reason it is doing that is either the pad on the steering wheel is shorting as if you are pressing on it, or the clockspring under the steering wheel is shorting to ground. there is a horn relay in your fusebox inside the cabin; you could disable it there by pulling out the relay. don't pull the fuse because it carries other circuits as well. I couldn't find the exact relay position, but just feel them with your finger while someone honks the horn; the one that's clicking with the horn activation is the one to pull out. I can get you the layout of the fusebox but you really don't need it for that.

Mar 04, 2013 | 1999 Dodge Stratus

1 Answer

The horn on my 1997 Buick LeSabre started honking on its own. Sometimes I can stop it by hitting the horn pad hard, but it just stops for a few minutes and then starts again. I've had to have the...

Sounds like a short in the circuit, which may or may not be in the steering wheel. It might be, if hitting the horn button actually stops it for a while. Be careful with the airbag and remove the fuse before messing with it- I've heard a slight short will set it off.

May 12, 2017 | 1997 Buick LeSabre

1 Answer

1997 nisan xe p/u horn honks by itself... mostly when making turns

Step by step:
1. Your problem is in your steering wheel horn assembly.
2. If you have airbags I recommend finding which fuse controls them and remove them (SRS fuse), but before doing so make sure the steering wheel is perfectly straight. Disconnect the battery one or both sides. Wait ten to 15 minutes if you have an airbag to start working on the vehicle.
3. Make sure you wear an anti static wrist band, and or discharge your self on some metal before working with the air bag.
4. There should be screws on the back of the steering wheel to remove the center portion, remove and unplug not to forget where you unplugged what.
5. remove the center nut that holds the steering wheel on, use a steering wheel puller to remove the steering wheel, unless your he-man and can pull it off your self.
6. remove the horn assembly and replace with all new parts, every single piece of the horn assembly you must replace.
7. Reverse the removal procedure and work backwards.
8. Last, reconnect battery and fuses and if you have an airbag stand back while doing so in case airbag decides to discharge.
Hope this helps! Good luck !

Oct 10, 2010 | 1997 Nissan Pickup

1 Answer


since heat caused the problem, i used cold for the fix.....there are several types of canned "FREEZE" that are used for electronic testing...i sprayed the steering wheel--twice. i think it released the weight of the steering wheel cover on the horn contacts...that or my prayers were answered......whatever the fix----currently AIN'T BROKE.....

Aug 04, 2008 | 1997 Buick LeSabre

Not finding what you are looking for?
2002 Chevrolet Suburban 2500 Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides