Question about 1991 Ford F150

1 Answer

1991 f150 stuck in gear and it banges and rattels

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Most the times you have to go under hood and shift by hand, Needs replaceing.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What will cause my 1994 f150 with 5.8 has a ratteling noise on passenger side when i hold the brake in gear and give a little gas


on the outside?crawl under truck,and bang on catylitic converter,the core inside can break loose and cause a rattling sound,90s dodge v-8s do this alot too

Apr 09, 2014 | 1994 Ford F150 Styleside Supercab

1 Answer

1991 Ford F150 4wd 5.0 engine, tranmission E40D. overdive light brink off and on. put it in gear and the motor want to strall. already replace a solenoid inside the transmission didn't fix the pro


Hi Rodney, Have the vehicle scanned and diagnosed. That way you will know for sure where the problem is. I believe the problem is in the control system. Regards John

Jul 01, 2012 | Ford Expedition Cars & Trucks

1 Answer

I have a 1991 ford f150 302. When I turn something in the rear bangs and the truck hops kinda like turning in 4x4 on pavement. The bang is louder turning left than turning right. Going straight no...


The larger tires don't have a thing to do with the problem. I'm sure you have a conventional open differential. Your problem id probably with the spider gears in the differential. Sounds like you may have a chipped tooth in there. When you are traveling in a straight line all is good. When you initiate a turn the outside wheel turns faster than the inside wheel. If the spider gears have a broken tooth then this will create a problem when the left and right tires begin to turn at different rates of speed. If the gear doesn't mesh correctly and the tooth tips collide momentarily you will get the pop or a harsh jolt through your truck. You need to remove the cover plate and see if the spider gears are missing any teeth. Look in the bottom of the differential housing when you remove the cover. You will need to replace the spider gears. The bigger tires and heavier wheels may have caused your initial problem. When you place taller tires on the truck you place extra stress on the gears. If you went to 35"s or something like that you have probably broken a tooth or gear. Especially if you like to smoke the tires on a turn.

Oct 06, 2011 | 1991 Ford F150

1 Answer

2004 f150 runs fine two minutes ..then no oil 5.4


There is clearly a fault in the oil pressure side.

This could be a blocked oil filter with the bypass valve stuck closed.

Or the oil pressure relief valve could be sticking in the open position.

These are both relativelly easy and cheep things to try first.

Feb 03, 2010 | 2004 Ford F150

1 Answer

1991 302 runs like it is chocking out, I have changed the fuel filter, plugs wires rotor cap, and map censor, runs rough and worse when in gear, eating gas..help please? The truck is a 1991 f150 NITE 4x4


is it idling high and you put it i gear it runs rougher and smoke black check your coolant sensor also connection or sensor itself and fuel pressure if high check for return line blockage also vacuum leaks make sure you have the right vacuum going to your map sensor you need to check right vaccum at idle going to your map sensor/

Jan 19, 2010 | 1991 Ford F150

1 Answer

I have a 1991 ford f150 with a 5.8 engine, most everytime I fill up with gas it spits it back out. I have dual tanks


push the gas nozzle all the way in and maybe the anti theft flaps are stuck easy fix stick a long screwdriver in filler tube to see if they are stuck or if they are jammed in filler tube if screwdriver doesn't detect obstruction try a wire hanger witch is longer and skinnier

Dec 02, 2009 | 1991 Ford F150

1 Answer

1991 F150 stuck in 4x4 low


chk the linkage under the truck for any foriegn objects. block the tires and have a friend put light pressure on the shifter while you lightly tap the linkage.

Nov 16, 2009 | 1991 Ford F150

2 Answers

Power window on 1990 Ford F150 stops working


the motor has an armature inside that rotates.if it stops on the bad spot,it will draw alot of current.the armature has copper plates with a very fine separation between them.after a while the brushes wear the copper down and it can bridge 2 together.the motor will still run,until one brush stops right where the 2 plates meet.if you bang on it it will work too sometimes.

Jun 12, 2009 | 1991 Ford F150

1 Answer

1991 Ford F150 4x4 automatic w?overdrive no reverse grinds loud


I believe we call that a planetary gear, found in the rear of the transmission. Its gone.

Jan 05, 2009 | 1991 Ford F150

Not finding what you are looking for?
1991 Ford F150 Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...