Question about 1999 Jeep Cherokee

1 Answer

My 1999 Jeep Cherokee Sport with 4.0 litre engine, won't turn over. It seems like it's the alarm system and remote door opener. No way to pull the fuse when they don't supply you with the fuse diagram which is in owners manual that did not come with it. I pulled the positive off of the battery to reset the computer but that didn't help at all.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Always take off the the neg terminal olny, in some cars you have to get a plug that plugs into the liter with a 9 volt batt. so you wont lose any computer codes.you can pick this up in parts store,saw the other day at walmart next to the batt. chevy has a same problem and if you dont use this plug it locks up the car,truck.

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm lockout, after opening locked Jeep. can't start vehicle. Alarm shuts down engine


immoblizer are fun, no
fix it or defeat it.
you always have 2 choices.

3rd choice, get the FSM and read it.

Dec 08, 2013 | 1995 Jeep Grand Cherokee

1 Answer

1999 grand cherokee doors unlock with key fob but when any of the doors are opened the alarm goes off and will turn off with the key in the igintion


dude it wont work but u gotta use the keyless remote to disable ur alarm! its in the manual under security like page 200's

Jan 31, 2010 | 1999 Jeep Grand Cherokee

1 Answer

I have a 1999 jeep grand cherokee. the alarm goes off whenever i open the door if the vehicle has been locked the alarm stops when i start the vehicle i only have a key, no remote any ideas on how to fix...


If ithe alarm is factory when they will have to reset the alarm module with a scanner. If the alarm if aftermarket go to the control module and see if it has a reset button. FOBs (remote) can reset alarm. You Jeep is always set for break-in mode. The FOB sets this when ever the FOB is used to lock the doors. May be bad alarm module - Sorry - Good luck

Oct 17, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Can not disarm alarm on 2002 jeep grand cherokee


First, try to re-programme the RKE (Remote Keyless Entry) transmitters before searching for anything else. Assure that the batteries in the transmitters are in working condition and replace them if you are not sure. To pro-gramme the transmitters, perform the following:

Open the driver's door and let it be open throughout the programming process. Then, shift the mechanical door lock lever to the LOCK mode, turn the ignition key to the rUN mode. Within a period of twenty seconds, point a transmitter at the receiver dome and push the lock button for a period of five seconds at least. After the receiver has accepted the programming code the driver's door will unlock on its own. The first transmitter has been programmed, in the same extra transmitters up to four may be programmed in the same way, within twenty seconds.
If the alarm does not work properly, you may have a faulty alarm module and may have to be replace and its common problems with and older model. the systems work like a security systems, if you arms your system with the remote you have to disarm it also with the remote in order for the engine to start and run. The logic in the PCM prevents the VTSS engine no-run feature from arming until the engine start; Its one of the security systems jeep has and if you ask for my opinion its junk. hope that help some..

Jul 26, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Remote on '99 Jeep Cherokee not working...


Normally you can get the alarm to shut off by puttin ght key in the ignition or in the door and turning. The remote will need programed with the vehicle. Should run about 50.00 or so for service department to do this. My wife has a '99 cherokee and it did the same thing. I know the remote is the problem.

Mar 14, 2009 | 1999 Jeep Grand Cherokee

3 Answers

1999 JEEP GRAND CHEROKEE LAREDO


i have a 95 jeep grand cherokee lerado from time to time my alarm goes off i dont have a remote 4 my alarm but i found out that if you put the key in the driver door and unlock it. it will reset the alarm!!!!!

Nov 19, 2008 | 1995 Jeep Grand Cherokee

1 Answer

Looking to disable the alarm system for a 1996 Jeep Cherokee Sport


you need to find out which wires go to what like the ones going into the alarm and the ones coming from the car u might have to put them back together..hopefully they are color coordinated for you good luck

Oct 27, 2008 | 1996 Jeep Cherokee Sport

1 Answer

When opening the doors Console and Radio turn off!!


make sure to check the ground circuits coming from batterie to jeep body,

Jun 17, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...