Question about 2001 Hyundai Santa Fe

1 Answer

How do I replace the timing belt in a 2004 Hyundai Santa Fe?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Hi there please tell me is it a petrol or diesel?

Posted on Aug 21, 2009

6 Suggested Answers

  • 1 Answer

SOURCE: Fog Light Replacement Hyundai Santa Fe

The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.

Posted on Apr 06, 2009

  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

  • 3 Answers

SOURCE: how to replace timing belt in 2001 santa fe. What

I have a 2.7L v6 in my 2001 Santa Fe. It took approximately 3 hours to change the belt. One of the things you will have to do if you have the v6 is to support the engine and take off the passenger side motor mount to change the belt. Make sure you get the timing marks aligned because this is a zero tolerance engine. If you don't or if the belt breaks while the engine is running you will damage pistons and valves.

Posted on Apr 28, 2009

  • 84 Answers

SOURCE: Change serpentine belt 2004 Hyundai Santa Fe

it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,

Posted on Oct 05, 2009

tracer_steve
  • 59 Answers

SOURCE: 2004 Hyundai Santa Fe 2.7 all wheel. Crank sensor

Hi

On the 2.7 engine it is located beside the starter. You will have to remove the starters heat shield to gain excess to the crank sensor.

Posted on Jan 31, 2010

  • 2841 Answers

SOURCE: Timing belt in a 2005 hyundai replacement

You should find another dealer. Hyundai recommends replacing the belt every 60,000 miles and this dealer knows this. No reason at all to replace it at 42,093 miles. Remember that this is an interference engine so if the belt breaks serious engine damage will occur. Do not neglect this service at 60,000 miles.

Posted on Apr 08, 2010

Testimonial: "Thank You so much! I'll schedule my replacement at 60,000 with another dealer. :)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi all, hard time with serpentine belt replacement on my Hyundai Santa fe 2004 2.4l dohc. The problem is the two serpentine belt situation, I dont know how properly overlap the smaller one over gen


Hi Alex,here's a Autozone repair guide link showing you your belt diagram. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE Look's like both belts are using the crankshaft pulley,The alternator,the water pump and the crankshaft pulley is using one belt.Need more help,let me know.

Sep 19, 2016 | 2004 Hyundai Santa Fe

1 Answer

2004 hyundai santa fe sounds like a fan belt slipping only when cold?


Hi and welcome to FixYa!

When was your last fan belt replacement? Maybe now is a good time. If the belt is worn out it tends to slip regardless on cold or warm temperature.

Hope this shed some light. Have a good one and thank you for using FixYa!

Jan 21, 2011 | 2004 Hyundai Santa Fe

2 Answers

I have a 2004 Santa Fe with 39000 miles when can I aspect the driving or timing belt to go out


The timing belts must be replaced every 5 years or 50k miles, whatever comes first. The other belts whenever they give signs of slipping, no fixed date.

Jun 26, 2010 | 2004 Hyundai Santa Fe

1 Answer

I have a 2004 Hyundai Santa Fe 3.5 6 cylinder automatic transmission coming up on 60000 miles.How urgent is it to change out the timing belt?


hyundai say the belt should be changed when showing signs of fraying,BUT,i would strongly suggest you change at 60k or asap after.....

Jun 02, 2010 | 2004 Hyundai Santa Fe

1 Answer

Does the 204 hyundai santa fe v6 have a timing belt or chain?


it has a belt and it needs changing at 60k max.dont forget to change the tensioner at the same time.

May 12, 2010 | 2004 Hyundai Santa Fe

1 Answer

Diagram for serpentine belt


For the 2004 Hyundai Santa Fe:
I do not know if you have the 2.4L DOHC In-Line 4-Cylinder, 2.7L DOHC V6, or the 3.5L DOHC V6 Engine; however the Link below has all three Diagrams.

Click on the following: direct, free Link. It has the Belt Diagrams for your 2004 Hyundai Santa Fe. It also has very helpful Instructions and Directional Diagrams.

Let me know if this helped...
http://www.2carpros.com/car_repair_information/year/2004/make/hyundai/model/santa_fe/2004_hyundai_santa_fe_drive_belt_routing_diagram.htm

Apr 23, 2010 | 2004 Hyundai Santa Fe

1 Answer

How do I put a timing belt on a 2004 Santa Fe Hyundai?


Timing belt or serpetine belt...Either way, I'd buy a Chilton's Manual at Auto Zone or NAPA ($25) it should describe everything in detail.
Good Luck

Jun 23, 2009 | 2003 Hyundai Santa Fe

1 Answer

Change serpentine belt 2004 Hyundai Santa Fe


it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,

May 15, 2009 | 2004 Hyundai Santa Fe

1 Answer

Timeing replacement


90,000 kms is recomended

Mar 19, 2009 | 2004 Hyundai Santa Fe

1 Answer

Would like to know if water pump needs to be changed when doing timing belt on 2004 hyundai santa fe 2.0 liter and how long of a job is it


Hi....
On your 2004 Santa Fe.
The water pump is not driven by the Timing belt.
Is not stricttly nessesary to replace togheter. they are individual.
But I recomend replace the timing belt when you replace the water pump. Because for get axces to the water pump,
you need to remove all the Timing covers.
Is just a few more minutes to remove the Timing belt.
Inspect the Engine seals, cam and crank Replace if need.
My PC show me a 2.4L 4cyl. for 2004 santa fe.

Ok.. The labor for that job Removing the Timing belt and water Pump ...IS:
2.8 hours. just the water pump 2.4 hours.

OK.. I hope this help on your question...
Thank you for use fixya..

Aug 13, 2008 | Hyundai Santa Fe Cars & Trucks

Not finding what you are looking for?
2001 Hyundai Santa Fe Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...