Question about 2000 Ford Mustang

1 Answer

Trouble starting ford mustang gt after raditor hose blew

Before that happen i gotr stuck in the mud it was raining hard that evening. i had a hard time getting car out to but i did i am wondering if i damaged somthing from underneath the vehcile or did it too hot from try to force it back so i can get back on the road need help. thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

You may of got the engine too hot, inspaect the oil and water. see if you have water in the oil(oil pan). or oil in the water(radiator). if any of this is so, it is possible that you may of cracked the head or worse. using a radiator testor can help you determine if there are any leaks internally

Posted on Feb 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 mustang gt starts revs really high then dies


Sounds like the idle control valve. The same thing happened to my Mustang and that was my problem.

1_15_2013_4_59_36_pm.jpg

Jan 15, 2013 | 1989 Ford Mustang

1 Answer

Headlights won't turn on in my 1999 ford mustang gt


Sounds as though you have an exposed electrical connection that's either getting splashed from the tires, or the moisture is creating a temporary disconnection. This can happen, but once it dries it will resume working. I would have your electrical system checked. I would also have your headlight switch checked for a possible short.

May 08, 2012 | Ford Mustang Cars & Trucks

1 Answer

I have a 2003 PT cruiser having trouble overheating when i unplug the heat sensor the cooling fan goes on , when plug it in it shuts off


1 Inspect Hose Ruptured, Cracked or Leaking Raditor Hose. 2 Inspect Head Gasket Leaking Head Gasket. 3 Inspect Thermostat Thermostat Stuck Closed. 4 Inspect Raditor Cap Worn or Damaged Raditor Cap. 5 Inspect Raditor Raditor Fins Obstructed. 6 Inspect Belt Missing or Broken Water Pump Belt. 7 Inspect Heater Core Heater Core May Be Leaking Antifreeze/Coolant into The Vehicles Floor Area. 8 Inspect Intake Manifold Gasket Leaking, Worn, or Damaged Intake Manifold Gasket. 9 Inspect Cooling Fan Switch - Raditor Faulty Raditor Cooling Fan Sensor/Switch. 9 Inspect Water Pump Leaking Water Pump. 9 Inspect Raditor Fan Motor Faulty Raditor Cooling Fan Motor. 9 Inspect Relay - Raditor Cooling Fan Motor Faulty Cooling Fan Relay. 9 Inspect Fan Blade Broken, Missing, or Faulty Fan Blade(s).

Sep 03, 2009 | 2003 Chrysler PT Cruiser

1 Answer

2000 Ford Taurus: With heavy rain, water leaks into cabin filter holder, down air vent, and onto passenger side floor. This just started happening this spring. Are there drain holes somewhere I should...


if you can remove the plastic "cowl" section(s) at the base of the windshield and clear out any debris.sticks,dirt,acorns,mud,etc. THEN run a garden hose where the rain normally would run down and "flush"the drainage paths at each end by each fender. see if that fixes the problem. theres also a possibility that the windshield seal could be bad.

Aug 31, 2009 | 2000 Ford Taurus

1 Answer

Starting problem


could be more than one problem. If you tried to start it right after you blew the hose, something could have gotten wet. I hope you have tried after everything has dried out.
Also the sound could be something related to the timing. You could have lost a timing belt. Need to look into it alittle deeper. Get more info and let's try again.

Feb 20, 2009 | 2000 Ford Mustang

1 Answer

1995 Ford Mustang GT 5.0 starting problem


check for fuel pressure when it happens,sounds like a bad hose between pump and metal line inside tank.

Jan 31, 2009 | 1995 Ford Mustang

2 Answers

20005 mustang windows just go down after time


I kind of had the same problem. My locks would go up and down up and down . The problem was water running down the wires when it rained,carwash ,and would go into the sensor box and screw everything up! I had them seal the hole from the wires going through to the door "which was never done at ford!!! has not happened since .Took one day the place I bought the car wanted to take the quarter panel off and keep it for 3 weeks mind you I just bought the thing so dont be afraid to take it some where other than were you bought it.

Dec 28, 2008 | 2005 Ford Mustang

1 Answer

My 98 Ford Mustang Gt will not run at idle


Check your Idle air control motor, notorioius for causeing this problem. Hope this helps!

Dec 22, 2008 | 1998 Ford Mustang

Not finding what you are looking for?
2000 Ford Mustang Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...