Question about 2004 Dodge Dakota

1 Answer

Drivers side headlight doesn't turn on low beam high beam works replaced bulb no change I was told there was a blown fuse unable to locate fuse for lowbeams in either of the 2 fuse blocks althought i have no idea what the jc 1, jc 2 and jc 3 blocks are any help would be greatly appreciated!!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

You need to check for power at the low beam wire on the connector on the headlight...need to see if it is getting power...if it is...bad connectore or socket for the buld...if not ...need to chase wiring problems

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

Prius headlights work only on highbeam


There should be separate fuses for high and low beams on a Prius. If one of your headlight bulbs is bad, it could have blown the low-beam fuse. Check for blown fuses behind driver's side headlight fuse panel. If new one blows, replace headlight bulbs and try again.

On 2004-2009 Prius, driver's side headlamp bulb can be replaced by removing hold down screws and folding fuse panel upward to access rear of headlight assembly. Large round cover with 3 tabs unscrews about 1/4 turn to remove. It's really tight and held by friction of large O-ring so it'll take some muscle but it will eventually give. Be careful replacing bulbs as metal clips can be easily installed incorrectly resulting in tilted headlight beam. 3-tabs must rest on flat surfaces on mounting area before spring clip can be latched in place. 3-prong plug can be wiggles sideways/up and down to remove from bulb.

Oct 24, 2013 | 2006 Toyota Prius

2 Answers

Prius high beam lights work but low beam lights do not work?


On a 2008 Prius, If both High beams work but only one side has working low beams, then it is most likely a fuse. So before breaking your knuckles to change the bulb, check the fuse first. I found out the hard way as my mom distressed to me that her drivers side headlights were out. So without checking to see if low and high were working, I proceeded to remove and replace the bulb - ouch! There are 4 10 amp fuses that protect the circuits for low/high beam function. They are under the hood in the fuse box on the drivers side and they are marked on the box cover. Check them before changing the bulb.

Oct 29, 2012 | 2006 Toyota Prius

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

How to change the low beam bulb on driver and passenger sides


the low beam bulb is one with the high beam ,so you need to replace the headlight bulbs, its hard to believe they both went at the same time,i would buy one and replace it if lights still don't work than you might have other issues like maybe a blown fuse.

Jan 27, 2010 | 2005 Nissan Altima

1 Answer

Low beam dosent work. bulb is good highbeam works cant find fuse for lights. its not underhood


Hi,
It has been because the lamp bulb or halogen lamp module has reached the end of its serviceable life, not because of any wiring problems. Low beam burns out first because it is on the most. If low beam is lost simultaneously in both headlights, I would check fuse first, then the headlight switch. If low beam is lost on one side only, it is almost always going to be due to the bulb or lamp module needing to be replaced. In that case, replace them in both headlights because the other one will be going kaput in short order, as well.
Most like the low beam filiment is bad but the high beam filiment is still good, try replacing bulb. If replacing bulb does not fix problem then you probably have voltage problems and should check the voltage reading and the plug.
OR
isolate the wire that comes from the headlight switch to the headlamp bulbs for low beam and check to see if there is a short in the wire. You can find this wire by using a test light turn on the key and get a good ground with the test light poke the wire and see if the test light illunimates with the headlight switch on.
check the wires, and check the fuse for your lowbeams. could of blown a fuse on your lows, but your highs will still work.

The fuse box is located in the engine compartment,on the driver's side. Has thumb-screw retained cover.
Thanks for contacting fixya.com

Nov 07, 2009 | Dodge Ram 1500 Cars & Trucks

5 Answers

I have no headlights!! parking lights, taillights,and blinkers all work fine. none of my fuses or bulbs are blown


I have a 2004 ram 2500 and all my lights work except for low beams. It is not in the switch, I haver replaced the switch with no change. This is a circuit problem with these dodge pickups. I haven't firgured out what it is but it isn't the switch. and unless the low beams and high beams are fused seperate, it isn't a fuse problem either. i have looked for a fuse and can't even find the fuse for the headlights. Im lost like you!

Jun 15, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2004 Dodge Dakota Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...