Question about 1980 Chevrolet Corvette

1 Answer

Where do I add power stearing fluid

I need to add power stering fluid, and dont want to take it in. where is the resivor? I have a 1980 corvette

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The power steering pump on a 1980 corvette is located directly under the alternator. I have found it easiest to reach between the alternator belt and unscrew the cap, then use a long stemmed funnel to fill it. If you shine a flashlight down into the spout, you'l avopid overfilling.

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install steering wheel 1989 corvette


put stering wheel on straight and tighten the bolt in the center. place center cover on and done. if you want to take one off first you need a stearing wheel puller

Mar 15, 2013 | Chevrolet Corvette Cars & Trucks

1 Answer

Power srering fluid turned clay color


Yes, this is a problem. The clear power steering fluid is a mineral oil base and the red Lucas additive is petroleum base. Your car uses the red petroleum base, which is actually Dexron ATF (automatic transmission fluid). Lucas is great stuff, the person at the parts store just doesn't know their stuff. You need to flush the system to save your pump from going out very prematurely.

Jan 28, 2013 | Cars & Trucks

2 Answers

Where do you find the resivor to fill the power stearing fluid


when viewing from the passenger side, lower left of the engine use a flashlight. it's difficult to see

May 30, 2010 | 1995 Pontiac Bonneville

2 Answers

Loosing power stering fluid /looks like its coming from /bottom of resivor/its not coming from lines from resivor where is power steering pump 2000 concorde 4 door 3.2 engine


check you o-rings on the pressure line going into the pump . put a new one on it also check the pressure regulator nut that screws into the back of the pump see if it's tight! then check for a crack around the return hose nipple on the resevour

Jan 14, 2010 | 2000 Chrysler Concorde

1 Answer

Where do you install the power stearring fluid on a 2002 nissan sentra


if you look in the engine bay the power steering fluid should have a yellow or green top it also should be marked powersteering fluid resivor

Oct 28, 2009 | 2002 Nissan Sentra

2 Answers

How or where is power stering resivor


From the front of the car, walk around the passenger side and shine a light down the fire wall. If you lean in you will see the cap. I used a tranny funnel to add fluid to mine.

Jul 29, 2009 | 2003 Chevrolet Impala

1 Answer

Leaking power stering


The steering sounds weird because the Power steering pump is starting to mix air into the fluid , it might make more noise turning than going straight. the places it most likely is leaking is the high pressure hose to the steering rack assembly , next would be the pump assembly , and the steering rack from there. the return line is more likely to have a seeping leak if any.

Hope this helps

Dec 20, 2008 | 1997 Chevrolet Malibu

3 Answers

05 impala steering noise. Rack or Power steering pump


the power steering fluid is probly the first thing u should check if that doesnt fix it replace ur fluid pump,.the resevior should be right around ur brake booster and master cylinder,.hope u fix it and find it

Nov 20, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...