Question about 2003 Toyota Highlander
When I turn off the ignition on my 2003 Toyota Highlander the clock resets
Have you checked any fuses? Does the climate control light up? If not then in the under hood fuse box (left of drivers side) check the ECU-B fuse should be 7.5 amp. Check the heater fuse in the fuse box inside the car it should be 15 amp. If the fuses are OK and only the clock is bad check out my site www.autoclockrepair.com I offer a repair service.
Posted on Jul 18, 2010
I would check your fuses you probably have a blown one.
Posted on May 16, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 05, 2016 | 2002 Toyota Highlander
Oct 12, 2015 | 2005 Toyota Highlander
Oct 19, 2014 | 2002 Toyota Highlander
Apr 09, 2014 | 2003 Toyota Highlander
Dec 14, 2013 | 2006 Toyota Highlander
The maint req'd light goes on when your vehicle is due for an oil change. If you've recently changed your oil - sometimes your mechanic won't reset the built in tracking settings for when you are due for another oil change. Here's how you can reset it.
Turn ignition to "ACC" and press the odometer button until the display reads actual mileage (not Trip A or B).
Turn ignition off.
Hold the same button down that you used in step 1.
While holding the button, turn ignition to 'ON'.
The 'Maint Reqd' light should blink and go out.
Nov 09, 2010 | 2005 Toyota Highlander
Oct 13, 2009 | 2008 Toyota Highlander
Oct 02, 2009 | 2002 Toyota Highlander
Sep 29, 2009 | 2003 Toyota Highlander
Jun 16, 2009 | 2003 Toyota Highlander
Jul 09, 2014 | 2003 Toyota Highlander
1,005 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: