Question about 2006 Mitsubishi Lancer Evolution

2 Answers

How to take evo8 tranny out ??

I want to take my tranny out of my 2004 mitsubishi evolution .

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 333 Answers

Not that different from any other transmission removal, with two exceptions:

The center differential has two axles inside it that need to be removed with a slide hammer in order to detach it from the main transmission.

The 6 speed transmission (if equipped) has a pull-type clutch that must be disengaged from the transmission before removal. To do so take the rubber access plug off the bottom/front of the bellhousing, and insert a long flat head screwdriver in to reach the collar at the clutch. Once behind the collar, twist the screwdriver and it will release the collar from the pressure plate, allowing you to pull the transmission off the engine.

The rest is no different from any other transmission removal.

Posted on Sep 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Not really a easy thing to do yourself. One of those things where if you have to ask, you probably are not ready to do it. But here is a great writeup on how to do it:

Also mirrored here with discussion:

Mike W

Posted on Sep 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What battery goes in my 1992 Mitsubishi lancer Gsr turbo awd

Is it a import? if yes it will most likely have a smaller battery Which you can buy at local autospare shop

Nov 28, 2011 | 2004 Mitsubishi Lancer Evolution

1 Answer

Mitsubishi evolution 9 servicing

The timing and drive belts should be changed

Jul 12, 2010 | Mitsubishi Lancer Evolution Cars & Trucks

1 Answer

How do you adjust the rear camber on a Mitsubishi

have you lowered the car? There are bolts that you can get which allow you to adjust your camber. They are called cam bolts, I found some at my local napa store. I would really recommend taking the car to a tire shop or a shop with an alignment rack. If you try to eyeball it, chances are that you will have weird handling, and possibly accelerated tire wear. I fixed my negative camber issues on my 91 eclipse gs-t at my local community college while I was taking the suspension class. I have since steppe up to an evo8. Mitsubishi's are my favorite!

Mar 06, 2010 | 2003 Mitsubishi Lancer

1 Answer

When is the cam belt due for replacement

Call your local Mitsu dealer...probably 50-60k

Jun 14, 2009 | 2004 Mitsubishi Lancer Evolution

1 Answer

Is a clutch on evo8 fq340mr hard to fit, are there any special tools needed apart from clutch alligning tool?

hey i own a evolution III and believe me its very hard to change a clutch and there's a lot involved in doing it. as far as i know there's no tools needed to do it except a good set of sockets spanners and maybe a few ratchet spanners. last time i did a clutch on my evo it took 7 hours on my own

Apr 29, 2009 | Mitsubishi Lancer Evolution Cars & Trucks

3 Answers


May be you should make sure all the oil levels are good and especially the tranfer oil and check the drive shaft's center bearing as well.

Feb 04, 2009 | 2006 Mitsubishi Lancer Evolution

2 Answers

Mitsubishi Evolution 8 engine management light

why does my evo 8 cut out after hard acceleration
if left on idle it is ok but after `few mins starts to almost die then picks up to 1500rpm and then back to normal

Oct 26, 2008 | 2004 Mitsubishi Lancer Evolution

Not finding what you are looking for?
2006 Mitsubishi Lancer Evolution Logo

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides