- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
study the new fender and where there is a bolt hole then that is where you will find the bolts to remove on the old fender . They will normally be along the top inside , at the bottom near the door and around the bumper and up the panel that the door hinges are attached to
There are two spring clams that hold the assembly into the fender, and these are at either side of the assembly, there is usually a screwdriver slot near either side. Gently pry the assembly out, and remove the lens and back, the bulb sits in the twist assembly in the lens. Replace bulb with a clean hand, so that oil and dirt don't get on the bulb surface, pull bulb straight out from socket, and replace by inserting bulb back in socket. Voila. Replaced Turn Signal Fender light.
same as this...
"you can either start by taking the left wheel off or not, taking it off will assist you in removing the wheel-well-liner. remove the wheel-well-liner, remove the couple screw that screw the front bumper in the the fender, then remove the bolts holding the bumper onto the actual body of the car. lastly, as you pull the fender off, be careful of the side marker blinker light remove that as you pull the fender off. any questions? please rate!"