Question about 2001 Chevrolet Venture

2 Answers

Brake lights stop working

All of my brakes lights stop working. My turn signals work bit not my brake lights. Where is the fuse for the brake lights located so I can check it. I do not have a manuel to see exactly which one it is.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Hi there , Under your dash where the brake pedal is there is a small switch the brake pedal pushes against . They are easy to change and you can get them at any auto parts store.

Posted on Feb 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 49 Answers

It sounds like a bad ground .try pulling out the light and check the ground make sure there is a good ground.

Posted on Feb 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2002 Astro brake lights stuck on


Chevy has a different circuit for the brake-lights. Strange that the brake-lights don't go out, after the fuse and/or relay is removed. Unplug the brake-light switch. Are the brake-lights out now? The brake-light circuit travels through the turn signal switch. There could be a failure inside the turn signal switch or there could be a short in the circuit, causing the brake-lights to stay on. You can try removing fuses that have to do with protecting the turn signal and hazard flasher circuit. If this allows the brake lights to go out then I think you will have narrowed it down. What other tests have you run? Have you removed and inspected the lighting in the rear? Do you have a trailer hitch? I ask because in some applications, there can be a 12volt power source. If the power wire shorts against the brake-light wire, you can have this fault. Please let me know if this helps and feel free to write back with any questions. Be as detailed as you can. You are the eyes and ears of this subject, good luck.

Mar 16, 2014 | Chevrolet Astro Cars & Trucks

2 Answers

Only middle brake light works


I would expect to find the problem is the turn signal switch. The third brake light power does not go thru the switch.
You would need to check the circuit in and out of the turn signal switch for power.

Feb 19, 2014 | Dodge Stratus Cars & Trucks

1 Answer

Brake light is working but not the tail light?


There are three fuses involved.
There is a 25 amp fuse before the brake switch located in the fuse box under the hood. Then there are two 15amp fuses after the brake switch in the box inside the cabin. One is for the lower brake lights and the other is for the high mount light and the trailer connector.
You would need to know if the 15amp fuse for the lower lights has power when the brake pedal switch is applied.

Feb 01, 2014 | 2004 Cadillac Escalade Esv

1 Answer

Nissan Xterra Brake Light Fuse Location


Hi, you need to test if the power is coming to the plug for rear brake light. If the power is not there that is your first problems. Also may have earth wire problem.

Jul 20, 2013 | Nissan Xterra Cars & Trucks

2 Answers

I have no break lights or turn signals


Turn signal tail lights and BRAKE LIGHTS NOT WORKING


It can be faulty brake light switch causing the problem or its blown brake light bulb. First check and confirm brake light lamp is working and that's not the case.

For turn signal not working it can be faulty turn signal switch or its issue with wiring:----


==========

To trouble shoot brake and turn signal related problem, check the help links mentioned below:-----


Click the link:----
1996 Buick Regal Grand Sport Brake light Switch Location? http://schematicsdiagram.blogspot.in/2012/04/1996-buick-regal-gran-sport-brake-light.html

-----------
No brake lights on Buick? http://schematicsdiagram.blogspot.in/2012/04/no-brake-lights-on-buick.html

----------
Brake lights not working on 1989 BUICK REGAL?

http://schematicsdiagram.blogspot.in/2012/04/brake-lights-not-working-on-1989-buick.html

-------
How to replace Brake light switch on Chevrolet Tahoe?

http://technoanswers.blogspot.in/2012/02/how-to-replace-brake-light-switch-on.html

---------------
How to replace Parking, turn, and Brake Lights on car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-parking-turn-and-brake.html

----------
Upper brake lights work, but low brake light not working?

http://schematicsdiagram.blogspot.com/2011/12/upper-brake-lights-workbut-low.html

------------
1997 Cadillac Catera: How to replace Brake Light Switch?

http://howtobyme.blogspot.in/2012/06/1997-cadillac-catera-how-to-replace.html

------------


2003 Chevrolet S10 Tail light Fuse http://schematicsdiagram.blogspot.com/2012/11/2003-chevrolet-s10-tail-light-fuse.html

---------
Chevrolet Parking light and Tail lamp light Wiring diagram http://schematicsdiagram.blogspot.com/2012/11/chevrolet-parking-light-and-tail-lamp.html

----------
Car Tail Lights Not Working?

http://schematicsdiagram.blogspot.com/2011/12/car-tail-lights-not-working.html

----------
Turn Signal Not working http://technoanswers.blogspot.com/2012/11/turn-signal-not-working.html

----------
Right turn signal not working on Pontiac Car?

http://schematicsdiagram.blogspot.com/2011/12/right-turn-signal-not-working-on.html

--------
Only one side indicator light working on car?

http://schematicsdiagram.blogspot.com/2011/12/only-one-side-indicator-light-working.html

-----------
Turn signals not working on 1987 Jeep Wagoneer? http://schematicsdiagram.blogspot.com/2011/12/turn-signals-not-working-on-1987-jeep.html

1996 Chrysler LHS brake light circuit wiring diagram?

http://technoanswers.blogspot.in/2012/02/1996-chrysler-lhs-brake-light-circuit.html

----------
How to replace rear Brake lights on 2004 Toyota RAV4? http://schematicsdiagram.blogspot.in/2012/02/how-to-replace-rear-brake-lights-on.html

------------
One brake light on driver side not working, but other lights work?

http://schematicsdiagram.blogspot.com/2011/12/one-brake-light-on-driver-side-not.html

----------
2002 Lincoln Town car Fuse Box http://schematicsdiagram.blogspot.com/2012/11/2002-lincoln-town-car-fuse-box.html 2007 KIA Rio: Brake Light Fuse Box Diagram?

http://repairhelpcenter.blogspot.in/2012/06/2007-kia-rio-brake-light-fuse-box.html

-------------
Overhead Brake lights not working on 1999 GMC Sierra 4x4?

http://technoanswers.blogspot.in/2012/03/overhead-brake-lights-not-working-on.html

---------
2004 Ford Mustang: Brake light Fuse Location?

http://howtobyme.blogspot.in/2012/05/2004-ford-mustang-brake-light-fuse.html

---------

These will help.

Thanks.

Nov 24, 2012 | Cars & Trucks

1 Answer

I have a 98 eclipse. I was putting new tail lights on and then the signals stopped working along with the brake lights. the fuse to the brake lights had burnt so I replaced it. The signals however are...


IF THE TURN SIGNALS STILL WORK IN THE FRONT, THAT MEANS THE FUSE & THE FLASHER ARE OK. IF THE SIGNALS DON'T WORK AT ALL CHECK TURN SIGNAL FUSE & STOP / BRAKE FUSE. ARE YOU SURE THE CORRECT BULBS ARE BEING USED?

Jan 24, 2011 | 1998 Mitsubishi Eclipse

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

1 Answer

Brake lights and turn signal stop working at the same time


If brake lights not working then its quite possible that the problem is .either the brake light fuse or the brake light switch.The brake light switch is causing the turn signal light to stop functioning.Check out both the brake light fuse and the brake light switch. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 17, 2010 | 1998 Ford Expedition

1 Answer

Brake lights will not work turn signal works fuse is ok


if no brake lights are working,not even the high stop light in the rear window,And you have checked the brake lights fuse with a test light,it will be time to check the stop light switch located on brake pedal under dash.

Nov 26, 2009 | 1999 Chevrolet Lumina

1 Answer

Left rear turn signal and brake light dont work


You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.

Feb 17, 2009 | 1997 Jeep Wrangler

Not finding what you are looking for?
2001 Chevrolet Venture Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...