Question about 2001 Dodge Ram 3500 Truck
Installed a new pump in the tank two weeks ago and drove it twice went about 100 miles total. on the second trip the truck just shut down. would not crank back up. We took the pump back and replaced it. put new relays in another new filter also. And even checked to see that the front pump was working. when the switch is on and the tank is all in the rear pump will not pump. But if the pump and tank are out of the truck and electricity is applied the new pump works.Is there some kind of sensor I am over looking? Something that would cause the truck to shut down after those two trips? The reason we changed the first one was because of the sending unit by the way.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
it doesn't have a fuel pump relay it has a fuel pump control unit and it is located on the chassis back quarter drivers side near the tube cross member for chassis on top of chassis rail near bed mount. locate the rear springs front perch and it will be above that on top of rail.
hope this helps. good luck and please ask any question you have.
Posted on Oct 25, 2009
Testimonial: "Thanx for info..no wonder I couldn't find Relay! "
sounds like the turbo bearings are going.You could use molyslip oil additive,but this is only to coat the bearings it will not stop the noise for long....
Posted on Jul 27, 2010
Tips for a great answer:
May 04, 2013 | Cars & Trucks
Jan 22, 2010 | 2004 Dodge Ram 2500
Mar 31, 2009 | 2000 Dodge Ram 3500
Dec 23, 2008 | 2004 Dodge Ram 2500
Dec 23, 2008 | 2004 Dodge Ram 3500 Truck
Sep 03, 2008 | 2004 Dodge Ram 3500 Truck
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: