Question about 1995 Dodge Stratus

2 Answers

How do you remove the side mirrors on a 1995 Dodge Stratus

If you take the inside door panel off how is that done

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

Start by taking off the inside door panel. Screws are located:
Inside the door release handle under the small plastic panel
Inside the door recessed handle under the small plastic panel
Under the speaker grill you will find three screws
On the inside rim closest to the hinge.
I believe that is all the screws, but check again.
Then there is the plastic retainers. They go around the lower perimeter of the door panel. Use a flat head screw driver or panel removal tool. The panel will be held on by the window wipe, push up on the panel. The door release bar is removed by pushing the retainer to the side and pushing the bar out. Remove all the wire connectors from the panel (mirror, lock, speaker, window.) Panel is now off.

There is a wing panel held on by two screws. underneath there may or may not be body plugs. Remove Them. There are three nuts that hold on the mirror. I believe they are 8mm deep well. Push the wire through the membrane.

Reverse to replace.

Posted on May 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 21,936 Answers

Call a local mobile mechanic if you dont know as you could damage the panel if you dont know how to remove one

Posted on Apr 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plastic Stuck on Mounting Bolt


Easiest way I can think of would be just to use a pair of side cutters, or wire cutters, and break it off.

Nov 07, 2013 | Dodge Cars & Trucks

1 Answer

Have to replace the passanger side mirror on 2000 dodge stratus. how do i go about doing this


remove the triangle trim piece on the interior side of door (usually snap on a delicate pry with a flat head screw driver will do the trick)
next remove the (3) 10mm nuts securing the mirror to the door, next unplug the mirror by squeezing the plug connector, pull the mirror of the outside of vehicle. Reverse this order during installation and you should be fine.
Note the mirror may fall and scrath the paint while the nuts are off, keep a hand on the old mirror to prevent from falling during removal

Feb 19, 2011 | 2000 Dodge Stratus

1 Answer

How to remove the inside door panel from a dodge 2005 2500 pick up


FRONT DOOR TRIM PANEL - REMOVAL
Release door latch and open door.
Roll window down.
Remove window crank Window Crank - Typical , if equipped.
Remove screws attaching trim panel to door Door Trim Panel and Trim Panel Screw
CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

Simultaneously lift upward and outward to release retainer steps from inner door panel Trim Panel Retainer
Disengage inside handle linkage rod from inside handle.
Disconnect speaker harness wire connector Speaker And Power Mirror Connector
Disengage power mirror wire connector, if equipped (driver's side only) Speaker And Power Mirror Connector
Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped Power Door Lock/Window Connector
Separate door trim panel from vehicle.
INSTALLATION
Position trim panel at door.
Engage wire connector for window/lock switch panel, if equipped. Engage clips attaching power window/lock switch panel to door trim panel.
Engage power mirror wire connector, if equipped.
Connect speaker harness wire connector.
Engage inside handle linkage rod to inside handle.
Align trim panel retainer steps with inner door panel and slide trim panel into place.
Install screws attaching trim panel to door.
Install window crank, if equipped.

Hope helped with this; remember rated this help. Good luck.

Nov 12, 2009 | 2005 Dodge Ram 2500 Truck

1 Answer

How do I remove the passenger side power mirror on 98 caravan?


If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.

On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door

Oct 28, 2009 | 1998 Dodge Grand Caravan

1 Answer

How do you replace the passenger mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls and your mirror. Then you can remove the bolts securing your mirror to your door

Oct 08, 2009 | 2006 Dodge Stratus

2 Answers

I have a 2007 dodge grand caravan. I am replacing


the plug is inside of the mirror housing once you take the old mirror out if you need to plug it after the housing and you replaced the whole mirror the plug is inside the door panel

Aug 28, 2009 | 2007 Dodge Grand Caravan SXT Minivan

1 Answer

How do i remove the door panel on a 1996 dodge stratus


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Aug 07, 2009 | 1996 Dodge Stratus

1 Answer

Replacing passenger side-view mirror on 1999 Dodge Stratus


Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .

Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!

Apr 19, 2009 | 1999 Dodge Stratus

1 Answer

Side view passenger mirror


there will be a small triaglular panel in the furthest side of your door which despite it being hard to come off will clip off. try to take care while pulling this off as the pins can snap quite easily. then you will see the 2/3 bolts connecting the mirror. once you have undone these then unplug electrics which im presuming from age it has, and you will be ready to connect new one.

Feb 25, 2009 | 2002 Dodge Stratus

1 Answer

Side mirrors


simple there are 3 nuts 8mm or 10 mm one the backside of those mirrors. sometimes ya just pop off the upper trim on the inside of the door. sometimes you have to remove the whole door panel and that little triangle piece to access the nuts.

Jun 27, 2008 | 1995 Dodge Ram 2500

Not finding what you are looking for?
1995 Dodge Stratus Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...