Question about 2007 Kia Sorento LX 4x4

1 Answer

Low beam bulb blown 2008 Sorento LX

My lb bulb on the driver's side has blown for the first time, since I've bought vehicle. How do I replace it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Welcome to Buying Headlights Anonymous. If you have a Kia, you'll soon own shares in Sylvania.
I have an '03, and if the mounts haven't changed, you get at the bulbs by opening the hood and removing three screws that hold the headlight assemply - large screws in plastic tabs. ONce they're out, pull forward on the inside edge (toward the centre of the grill) of the headlight assemply. Should slide out toward you - might hear a 'snap'. Once it is out, unscrew the 'cap' behind the light, diengage the spring clip and pull out the bulb.

Posted on Mar 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Low beam headlight drivers side don`t work. high beam it works.


Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch.

Oct 05, 2012 | 1996 Ford Explorer

1 Answer

I need to replace the drivers side low beam on my 2008 subaru tribeca


The High and low beams are all in the same bulb. You have to reach in behind the light in the engine compartment and undo the retaining collar and pull it out and then pull the bulb assembly out if it separates from the collar. Unplug the bulb and replace it. I usually stop at Walmart and use the little box they have there to find the proper bulb for the vehicle, in most cases they are the less costly of the places you can get the bulbs.

Jun 24, 2011 | 2008 Subaru Tribeca

2 Answers

2008 gmc truck Low beams quit working. I have High beams and running lights only. whats possible fix?


Are the bulbs good?

If your low and high beams are on the same bulb, then the low beam elements have blown even though the high beam still works, you need two new bulbs.

Apr 04, 2011 | 2008 GMC Sierra 1500 2WD

1 Answer

Acura 2003 3.2TL driver side headlight low beam is out...is not the bulb ..how can this be? any idea?


most newer vehicles have individual fuses and or relays that controls each headlight separately, check the fuse panel under the hood, inside the lid there is usually a listing of what the fuses and relays do. look for drivers side low beam and take a look at the fuse, if it blown, try to replace the fuse, but there is usually a reason why it blew in the first place.
How did you test to see if the bulb was still good? ive seen dead bulbs that still look ok, try and plug the bulb from the non working side into the working side and double check.

Nov 24, 2010 | 2002 Acura 3.2TL

1 Answer

How to change the low beam bulb on driver and passenger sides


the low beam bulb is one with the high beam ,so you need to replace the headlight bulbs, its hard to believe they both went at the same time,i would buy one and replace it if lights still don't work than you might have other issues like maybe a blown fuse.

Jan 27, 2010 | 2005 Nissan Altima

1 Answer

How do I change out the low beam headlamp bulb on a 2007 Sorento LX 4x4?


they are different on every SUV if you have a autozone near you if you get the replacement from them they help you install it for free you can also try these websites www.alldatadiy.com and www.autozone.com wish you the best of luck Michigan Man.

Oct 22, 2009 | 2007 Kia Sorento LX 4x4

Not finding what you are looking for?
2007 Kia Sorento LX 4x4 Logo

980 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...