Question about 1992 Buick LeSabre

2 Answers

I dont know how to change w/p pully - 1992 Buick LeSabre

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

+1, The pulley is held in place by the 4 bolts. Remove them, then you can remove belt, and pulley will just about fall off. Then you can reach all of the w/p mounting bolts.

Posted on Mar 24, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

The waterpump pulley just unbolts on a 3800

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, Then look for an arrow or a mark on the cam shaft pully and another mark on the block. Line those up. Put the belt on, make sure the marks did not move.

Feb 12, 2013 | Cars & Trucks

1 Answer

1990 ford ranger 2.3 timing belt pully diagram


Set the crank to TDC using the timing marks, look for a mark on the cam pulley and a mark on the head, line those marks up and put on the belt

Feb 12, 2013 | Cars & Trucks

1 Answer

Water pump pully dont line up and drive belts keep fallin off


I'm wondering?..did you posiably R&R the water pump and then the belt would come off? if so you prob. have the water pump pully backward's, this hap. 2 me years ago on a 82 rabbit. i took d 3 13mm nuts off pump, fliped d pully reinstalled & tada. like GI-joe ounce said: "knowing is half the battle"

Feb 10, 2011 | 1987 Volkswagen Cabriolet

1 Answer

One of my pullys is sqeeling on my car. I replaced idler pully but that wasn't the one ... How can I figure out which one it is?


buy some squirt greese lube from store like advance.. squirt one pully at a time drive it.. if it still does it do another till u find it stops then u will know what one it is.. dont squirt belt.. just inside and around the pully

Dec 29, 2009 | 1993 Buick Park Avenue

1 Answer

Changed fan belt on landrover discvery 300 sqeeking sound , changed bearing in tenshion arm cleaned pullies dont know were this sound is from ??


make sure its tight and make sure you replaced all the belts unless its serpentine. I would try some belt applicator aka belt spray

Sep 09, 2009 | 1997 Land Rover Discovery

1 Answer

How do you change a water pump on a 1992 Chevy Lumina


No need to drain rad You dont even need to remove the lower rad hose just remove the four bolt on the water pump pully 10mill wrench then the pully should come off after that there are 5 8mill bolt that attach the pump to the housing easy as that by the way you need to left up the idler pully to get the belt off it swings up.

Jul 17, 2009 | 1992 Chevrolet Lumina

1 Answer

On-line step by step guide to change timing belt.


this is the best guide/instructions I could find on the net and I do allot of this.
take the timing cover off the belt there should be a gear below the camshaft pully its a tensioner use a peice of chalk and mark the very top of the cam pully and the very bottom of the crank pully do your best not to turn them loosen the tensioner pully the belt will loosen up take it off put the new one on if you turned the pully put it back slowly tighten the belt when its tight if the pully turned when tightening pull the slack out by hand then tighten it both chalk marks should be lined up if they are start the car always unplug the battery first and dont rotate the pullys more than a few inches if nessacery when the belt is off you could cause damage to the valves

Feb 14, 2009 | 1998 Honda CR-V

Not finding what you are looking for?
1992 Buick LeSabre Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...